RickC Posted July 23, 2019 Share Posted July 23, 2019 Hi all, I'm looking to put an GSX1100 into a GSX750ET, would anyone have a CAD file or drawing to share? I have an engineering firm local to me that does waterjet cutting for the right price if I can find a drawing. Cheers, Rick Quote Link to comment
wraith Posted July 23, 2019 Share Posted July 23, 2019 I think it's only the bottom brackets (under the front side covers) that are different. 1 Quote Link to comment
Blubber Posted July 23, 2019 Share Posted July 23, 2019 I can't remember needing different mounts... Maybe i used the 1100's or modified the 750. Think only thing needed was drilling the lower frame mount slightly bigger. 1 Quote Link to comment
no class Posted July 23, 2019 Share Posted July 23, 2019 750 frame lower mid mounts are different than 1100..... all the rest of the mounting are the same . 1 Quote Link to comment
baldrick Posted July 24, 2019 Share Posted July 24, 2019 im also looking for the sizes of this, if anyone has them Quote Link to comment
RickC Posted July 24, 2019 Author Share Posted July 24, 2019 10 hours ago, Gammaboy said: looks like this: Thanks Gammaboy, that is a slightly different design from the pictures that I have found but I like it and I will try to copy it. Cheers Rick. Quote Link to comment
RickC Posted July 24, 2019 Author Share Posted July 24, 2019 1 hour ago, baldrick said: im also looking for the sizes of this, if anyone has them Hi Baldrick, I plan to pull my engine down, I have a friend that I can lean on for some Cad work, I'll post a drawing up once I have them, might take me a month or so. Cheers, Rick 1 Quote Link to comment
yoshi Posted July 25, 2019 Share Posted July 25, 2019 hi rick I think the breather box on top of the cam cover is a tight fit may need a bit of work on the frame there from what I can remember yoshi Quote Link to comment
RickC Posted July 26, 2019 Author Share Posted July 26, 2019 13 hours ago, yoshi said: hi rick I think the breather box on top of the cam cover is a tight fit may need a bit of work on the frame there from what I can remember yoshi Yoshi, The 1100 engine is tight in the 1100 frame so it wouldn't surprise me if that is the case, Thanks for the heads up. Rick 1 Quote Link to comment
Gammaboy Posted July 29, 2019 Share Posted July 29, 2019 I just realised I have the cad for that bracket at home somewhere - will dig it out. 1 Quote Link to comment
RickC Posted July 30, 2019 Author Share Posted July 30, 2019 14 hours ago, Gammaboy said: I just realised I have the cad for that bracket at home somewhere - will dig it out. Thanks Mate, You would be a legend if you could find it. Quote Link to comment
no class Posted July 30, 2019 Share Posted July 30, 2019 I can understand using a cad drawing for a “complete” motor mount plate fab.... but just for the lower mids ??? you already have the frame hole centers on your original bracket...,surely you can make the one remaining hole or are you just lazy ? 1 Quote Link to comment
RickC Posted August 1, 2019 Author Share Posted August 1, 2019 I can understand using a cad drawing for a “complete” motor mount plate fab.... but just for the lower mids ??? you already have the frame hole centers on your original bracket...,surely you can make the one remaining hole or are you just lazy ? Yes I could make one, I spent two days making an 15mm thick aluminium dovetail as part of my apprenticeship, but I would rather spend the time on something else, the cost of a pair water jet cut out of stainless or alloy is well worth me not doing it and I get to support a fairly priced local business that doesn't rip off locals wanting small project jobs done in between their larger jobs. Quote Link to comment
Gammaboy Posted August 1, 2019 Share Posted August 1, 2019 Sorry, while I was off work sick yesterday I went to look for the cad, but the wife had used the bluetooth dongle for the mouse and keyboard in her laptop, and taken it to work with her. Will try to get it sorted over the weekend for you. 1 Quote Link to comment
Gammaboy Posted August 3, 2019 Share Posted August 3, 2019 Unfortunately, i've discovered that I've got it as a mastercam file, which i can't open. sorry. Quote Link to comment
RickC Posted August 3, 2019 Author Share Posted August 3, 2019 11 hours ago, Gammaboy said: Unfortunately, i've discovered that I've got it as a mastercam file, which i can't open. sorry. No worries, Thanks for taking the time to look. I will put one up once I get it drawn up, cut and proved. Cheers, Rick Quote Link to comment
baldrick Posted August 4, 2019 Share Posted August 4, 2019 why not just post up the dimensions? from the bottom bolt centres Quote Link to comment
RickC Posted August 4, 2019 Author Share Posted August 4, 2019 7 hours ago, baldrick said: why not just post up the dimensions? from the bottom bolt centres I can do that, I have to pull out the 750 engine and finish stripping the 1100 engine down to a bare case so it may be a week or three depending on what else I have going on. 1 Quote Link to comment
Gsxrsam Posted August 4, 2019 Share Posted August 4, 2019 On 8/3/2019 at 12:09 PM, Gammaboy said: Unfortunately, i've discovered that I've got it as a mastercam file, which i can't open. sorry. Send it to me, i may be able to open......:) 1 Quote Link to comment
Gammaboy Posted August 5, 2019 Share Posted August 5, 2019 On 8/4/2019 at 5:43 PM, baldrick said: why not just post up the dimensions? from the bottom bolt centres Because I gave away my spare set the day before the thread started, and I don't have the Kat anymore... Quote Link to comment
RickC Posted August 7, 2019 Author Share Posted August 7, 2019 Gammaboy, It's all good mate; I'll get one drawn up and share it here. Thanks for trying to help. Rick 1 Quote Link to comment
vizman Posted August 7, 2019 Share Posted August 7, 2019 5 hours ago, RickC said: Gammaboy, It's all good mate; I'll get one drawn up and share it here. Thanks for trying to help. Rick This 1 Quote Link to comment
Gammaboy Posted August 7, 2019 Share Posted August 7, 2019 Gsxrsam has the matercam file now, he might be able to do something with it. 2 Quote Link to comment
johnr Posted August 11, 2019 Share Posted August 11, 2019 this one? saved from the old site 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.