Screwriverracing

Just found this from RACETECH

Hi Gixer1460, I need to retard the ignition as the starting map is preset and can't be altered, once running above a certain rpm it works of what you set in the map. Just the way RACETECH designed it, a bit rubbish really. Cheers SRR

Got some spare time, so hopefully going to work on the bike next week. In order to stop the kick back I am going to cut slots in the pick up plate to retard the ignition, then I will add the retarded amount to the ignition map. Cheers SRR

Hi All, so what oil filters are you using on your efe's, oem or aftermarket, and if aftermarket which ones are any good. And second question, what all for efe Turbo, was using Motel. last, what spark plugs. thanks in advance. Cheers SRR

Great, thanks for that. Cheers SRR

Hi all, I want to retard the standard ignition on a efe, can't remember which way to move to back plate, ( dremel the slots)does it go anti clockwise or clockwise? Cheers SRR

Can't make your mind up, so why not use BOTH. Cheers SRR

I agree with just bolt and locknut, when it's spinning it creates a lot of force, so I would definitely be looking else where. I always shotblast the steels so it grips really well when locked up. doesnt make much difference with heavier bolts if you haven't got anything to compress it against. Cheers SRR

Yes as Arttu says be careful when getting one, one I had from a reputable company knackered my head, turned out the lines flowed less oil than the original oil ways up the studs. Mine was dry blocked, oilways blocked off at the bottom of the studs.so just make sure the lines are big enough, someone on here should be able to tell you the right size lines, simple calculation I expect. Cheers SRR

And when you put the washers back on, slide them on a screwdriver then put the end of the screwdriver on the stud and drop the washer down, saves dropping the odd one down the cam chain tunnel. Cheers SRR

As said before fit an outboard alternator from more modern bike, car or boat. There are some small units with good output, I need one but am waiting for someone to make one I can buy. Cheers SRR

Most fuel injection pumps will draw similar current, I'm having similar problems. You need to upgrade the charging system, possible fix is outboard alternator. Cheers SRR