Jump to content

Screwriverracing

Members
 View Profile  See their activity

  • Posts

    395

  • Joined

  • Last visited

 Content Type 

Everything posted by Screwriverracing

  1. Screwriverracing
    Hi, the spondon now has a charge cooler fitted. Cheers SRR
  2. Screwriverracing
  3. Screwriverracing
  4. Screwriverracing
    If the frames brazed why not shot blast it scotch bright it and lacquer it like some XR 69’s. Cheers SRR
  5. Screwriverracing
    Did it work? Cheers SRR
  6. Screwriverracing
    And here it is
  7. Screwriverracing
    No, it's M84 the cheap mans M800. Cheers SRR
  8. Screwriverracing
    Mine, know awaiting surgery to have motec M84 fitted and a list of stuff as long as my arm to do, not sure if I'll ever get it going or not. Cheers SRR
  9. Screwriverracing
    Great idea, brilliant but simple. Cheers SRR
  10. Screwriverracing
    Ther should be a small rubber stopper in the small hole on the steel spline, or there always was on mine. Cheers SRR
  11. Screwriverracing
    Yep looks like past it's Sale by date, also the little rubber stopper seems to be missing, time for a new one. cheers SRR
  12. Screwriverracing
    Another idea is put two batteries on and run them in series for the starter motor, gives 24 volts at starter and spins over a lot easier, run rest of electrics off just one of the batteries.Did this on our dragbike without any problem 13/1 comp. Cheers SRR
  13. Screwriverracing
    I used to have one, took it to IOM and Steve Burn's Dyno'ed it, made an impressive 37.5 BHP. When I got it home I discovered the waste gate was jammed, but had some fun on it. Cheers SRR
  14. Screwriverracing
    Got a new bolt on goody
  15. Screwriverracing
    Could be the rotor come loose and spinning on the shaft, don't try it again until you inspect it. Cheers SRR
  16. Screwriverracing
    Before you butcher it try spraying carb cleaner on it, worked on mine for about 5000 miles. Splitting the cases is the best way,but have also done it in situ, but didn't last as long as splitting cases. Cheers SRR
  17. Screwriverracing
    Use a bit from a impact drive and put a small spanner on it Cheers SRR
  18. Screwriverracing
  19. Screwriverracing
    Thanks Arturo, how close to the cam does it sit, and what degree btdc does it read? any pics of inside the cam cover? Cheers SRR
  20. Screwriverracing
    Hi All, has anyone fitted a cam sensor to a EFE, if yes how did you do it and got any pics? Cheers SRR
  21. Screwriverracing
  22. Screwriverracing
    Had a play today, and got it running.
  23. Screwriverracing
  24. Screwriverracing
    Yes, never changed mine. Cheers SRR
  25. Screwriverracing
    Managed to do a bit on it today, tested the FPR as thought it was faulty, seems to be fine. https://youtu.be/rKb0yX3Xq6Q Hopefully do a bit more tomorrow. Cheers SRR
×
×
  • Create New...