Hawky

Thanks for the reply and info Been doing a fair bit of research on them and the later dr based freewind motor's. Now i gotta find one

Looking at running a big Dr thumper motor in different chassis etc. Anyone in the know as to 650/750/800 dr range share the same crank cases?? All seem to look the same specs in pics ??

Managed to slip a thunderace 48mm Rwu front end in with some bearing and stem mods. Had the full rebuilt front end sat around so made use of it plus had a Marvic Penta front suited along with pvm discs.. just calipers to sort and that's the front done.. onto the back next

Thanks mr Bean. Will have a search around for the top bearing etc.

Looking to go the Rwu fork route on 750L project . anyone fitted srad / 600 k1-3 yokes ?? Before I purchase some to try. cheers

Cracking bikes the tl's had a s with the r motor fitted...a couple of r's and allways regret selling em...one day i would love to get another

Yes i will take a gander and visit this year again

Looking very nice ...Top job

Cracking bike that I'm depressed now as been on the search for a fair while for one of them eagle Mach 7 / cobra Rs mk1 systems !!! Great write up/info

Superb... diggin the 80's/90's dayglo theme TOP MARKS

Good shout thanks yep scotch and bullets/spades bloody everywhere

Am in dire need of a 87 slab 750 loom due to previous owners attempts to run koso dash and just general bad bodges for a streetfighter attempt.. Want to run it all back to stock incl bodywork etc. Question is... Are all oil cooled "main" looms compatible or do i require early 85-87 specific ?

On the Following

If you find a braced arm just use your wp bottom link knuckle and seperate dogbones to suit...you dont need the whole wr/ws dogs/bottom link to fit it in just chuck away the stock wn/wp dogbone link

Spot on