Gsxrsam
-
Posts
388 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Gsxrsam
-
works for me...
-
Weld 2 together then machine off what you don't need......
-
Ideas for scavenge pump mounting on mk1 Bandit.
Gsxrsam replied to Pegleg's topic in Forced Induction
We have modified the one on Clives bike but not had a go at making them. Ask Clivegto where he got it.. -
Ideas for scavenge pump mounting on mk1 Bandit.
Gsxrsam replied to Pegleg's topic in Forced Induction
You can get mechanical ones for end of crank....... -
32006 standard bottom taper bearing fits......
-
Welcome.. Most in here are thrifty with cash, so would just put a full bandit front end in, for less money than period correct aftermarket calipers......
-
the stems press right in tho...... rf is like et, threaded hole inside stem and top hat style stem....... fairly certain.
-
Buy a leakdown tester. if you have a compressor they are much better at the job......
-
Count me in.....
-
for what swingarm?
-
sounds like you have bandit stem...
-
30mm is bearing size...press in bit is 30.3 on slingy.
-
check against this.....
-
there are a lot of ngk copies being sold. They snap in half and are shocking quality...... We started using nippondenso ones......
-
Oh and without offset yokes the turning circle will be shite....
-
marksman bearing up front with 3mm spacer under cup.... fit full front end. Back is always a chain/tyre/chassis rubbing combo/compromise...
-
No tooling changes.... put some wussie cams in and 4mm smaller carbs makes a great torquey tourer.......All out of parts bins.... genius.....
-
I may turn up......lol
-
The rack extensions are 60-70 quid... spacer is about an inch thick.
-
Ah you say that.....but lol
-
Let us not tempt fate......again.......
-
I would need a van for that.......
-
Maybe a cheeky brekky wrap?
-
Quiche's and pasties rather than pastry top and bottom type pies.... but yes....
