1340banditpaul Posted January 30, 2018 Posted January 30, 2018 Can I use an 1100 GSXR cam cover on a 12 Bandit engine? Do I need to put the chain slider off the Bandit cover on to the 1100 cover and if I do is it just simply drill a couple of holes and bolt the slider on? Cheers guys. Quote
clivegto Posted January 30, 2018 Posted January 30, 2018 You might have to mod the breather cover a little on top of the cam cover where the 2 bolts go through. Quote
Swiss Toni Posted January 30, 2018 Posted January 30, 2018 4 hours ago, 1340banditpaul said: Can I use an 1100 GSXR cam cover on a 12 Bandit engine? Do I need to put the chain slider off the Bandit cover on to the 1100 cover and if I do is it just simply drill a couple of holes and bolt the slider on? Cheers guys. Read Frankensteins Pages in The Vault. Lots of good info as to what fits what. Quote
Dezza Posted January 30, 2018 Posted January 30, 2018 Does an 1100 slabside cam cover fit on a Blandit 1200 head and work properly? They look wildly different but I was informed that the SS part is magnesium although this could easily be BS. I am shit with computers. How do I find Frankenstein's pages? Quote
gray711 Posted January 30, 2018 Posted January 30, 2018 There’s an additional cam chain guide which sits under where the breather is on the 12 cover part # 5 Quote
Solcambs Posted January 30, 2018 Posted January 30, 2018 4 hours ago, Dezza said: I am shit with computers. How do I find Frankenstein's pages? Click here http://oldskoolsuzuki.info/archives/404 1 Quote
clivegto Posted January 30, 2018 Posted January 30, 2018 Don't see why not left one is 1127 same as b12 apart from the holes for part # 5 right one is 1052. 1 Quote
Dezza Posted January 30, 2018 Posted January 30, 2018 Other than that no difference then, i.e. weight due to 1052 cover being made of a different material rather than having fewer bits to it? Quote
gray711 Posted January 30, 2018 Posted January 30, 2018 (edited) It is possible to just drill a couple of holes in the 1127 cover to fit the chain guide, I’m sure the holes in the guide are threaded. When I had a B12 donk in my slabby it needed a new cam cover but I could only get an 1127 one at the time & remember drilling it to fit the guide Edited January 30, 2018 by gray711 1 Quote
1340banditpaul Posted February 2, 2018 Author Posted February 2, 2018 Well it defiantly can be done, I done it tonight, the GSXR cover even has 2 indents in the case where you drill the holes aswell ;-) 2 Quote
no class Posted February 10, 2018 Posted February 10, 2018 On 2018-01-30 at 11:08 AM, clivegto said: Don't see why not left one is 1127 same as b12 apart from the holes for part # 5 right one is 1052. Clive..... could you grab a pic of the covers laying flat...... would like to see the hight differances .... thnx Quote
clivegto Posted February 10, 2018 Posted February 10, 2018 (edited) @no classyes no problemo, the 1052 one is a lot lower. Edited February 10, 2018 by clivegto 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.