Jdeac1981 Posted June 18, 2016 Posted June 18, 2016 Hi all, just been having a search but nothing coming up. Just wondering if anyone has put Mille wheels (rear) into a standard 1990 slingy swingarm. Just something I am looking at as I fancy going a different route with wheels. cheers all Quote
Rene EFE Posted June 19, 2016 Posted June 19, 2016 @vizman has put one in @minx' Slabby. I remember the chainrun being a bit of an issue. 1 Quote
fatblokeonbandit Posted June 19, 2016 Posted June 19, 2016 not a slingshot I know but I fitted these RSVR wheels to my bandit, wasent easy but got there in the end, then decided i prefered the 3 spokes 1 Quote
vizman Posted June 19, 2016 Posted June 19, 2016 with the oz forged prilli wheels I had to machine the face of the hub on the drive side something like 7mm, used a 525 sprocket and made a snowflake spacer to sit the sprocket back onto the carrier, along with shortening the rubber/steel cush drives.....also @yantosh made me two slotted spindle adjusters to replace the metmachex ones, the chain side was stepped out to the left by around 10mm , also had to make an offset front 525 sprocket to keep the 6 inch 190wearing wheel in the centre of the frame.... ...it might be a lot easier fitting one in a slingy....i'm not sure how different the cheaper non forged prilli wheels are....or indeed the spoke ones like skimmer boy had. 4 Quote
Jdeac1981 Posted June 19, 2016 Author Posted June 19, 2016 Thanks for the reply's. The wheels I was hoping to use are the same ones you have on that turbo beastie vizman. I take it the whole front end is aprillia? Was it much of a job to fit the front end also (just bearing swaps or not) The back looks like it took some work!!! cheers all Quote
vizman Posted June 19, 2016 Posted June 19, 2016 the front end is a mix of ducatii/prilli forks with spondon/bft adjustable yokes/stem, wheels are the expensive forged ones that look the same as the cheaper ones Quote
Jdeac1981 Posted June 20, 2016 Author Posted June 20, 2016 Vizman would you have a link to a build thread when yo did the wheel swap?? Quote
minx Posted June 28, 2016 Posted June 28, 2016 Old Red has its own project through in the Members Projects section @Jdeac1981 although not a huge amount of info on there. Quote
vizman Posted June 28, 2016 Posted June 28, 2016 ....I was too bizzy doing what I was supposed to be doing to do what I was supposed to be doing..... Quote
Jdeac1981 Posted July 2, 2016 Author Posted July 2, 2016 Can't seem to find that build thread. If someone could help please. Quote
Paulm Posted August 20, 2016 Posted August 20, 2016 Build is presently on page 5 of the members project section. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.