Jdeac1981
Members-
Posts
302 -
Joined
-
Last visited
-
Wheel rim to sprocket/brake disk
Jdeac1981 replied to Jdeac1981's topic in Water Cooled, V-Twins, Singles and 2-strokes
That would be good @Madb -
@clivegto there is no comment???
-
Sounds right to me. So I'm still looking for the sprocket side measurement please.
-
Thanks for that. Is it the same measurement on both sides.?
-
Hi all. Anyone running a water boiler rear wheel that could tell me the measurements from the wheel rim to the inside of the disk and also to the inside of the sprocket. At the centre of the wheel if you get what I mean. Asking hear as it's going in a oil boiler with a water boiler top braced arm. This is for a Gsxr 750 1995 swinger. Hope someone can help. Cheers jon Quote Edit
-
Good idea.
-
@dupersuncin picture of the nuckle I posted from underneath. Does it look right at the shock fork? There seems to be a slight gap either side between the nuckle and fork.
-
@GammaboyI have an 08 fz6 wheel that may work it is an abs hub though. Think it maybe wider than a normal r6 wheel. Need to find 1 to measure for comparison.
-
@Captain Chaosis there any particular cc bike that the calipers match the caliper mount I pictured above?? Would like to mount something more modern. Cheers
-
This maybe right to 132331182405 then you need dog bones and the sleeves from your swingarm and some form of crush tube between the 2 as iirc the 1 from your arm will not slide into the water boiler arm. None of the mention parts are mine. And I am in no way saying they are the exact ones you may need. Cheers jon.
-
This believed to be the same parts/ fitment 253040239418
-
Just a quickey search 322510583198 caliper and mount + mc etc
-
Arm was a 95 sorry.
-
Calipers mount is 75mm. At wheel spindle is approx around 250mm + this is how I have it unless I've done something wrong.