Jdeac1981

That would be good @Madb

@clivegto there is no comment???

Sounds right to me. So I'm still looking for the sprocket side measurement please.

Thanks for that. Is it the same measurement on both sides.?

Hi all. Anyone running a water boiler rear wheel that could tell me the measurements from the wheel rim to the inside of the disk and also to the inside of the sprocket. At the centre of the wheel if you get what I mean. Asking hear as it's going in a oil boiler with a water boiler top braced arm. This is for a Gsxr 750 1995 swinger. Hope someone can help. Cheers jon Quote Edit

Hi all. Could someone tell me the measurements from the wheel rim to the inside of the disk and also the inside of the sprocket. Athe the centre of the wheel if you get what I mean. This is for a Gsxr 750 1995. Hope someone can help. Cheers jon

Good idea.

@dupersuncin picture of the nuckle I posted from underneath. Does it look right at the shock fork? There seems to be a slight gap either side between the nuckle and fork.

@GammaboyI have an 08 fz6 wheel that may work it is an abs hub though. Think it maybe wider than a normal r6 wheel. Need to find 1 to measure for comparison.

@Captain Chaosis there any particular cc bike that the calipers match the caliper mount I pictured above?? Would like to mount something more modern. Cheers

This maybe right to 132331182405 then you need dog bones and the sleeves from your swingarm and some form of crush tube between the 2 as iirc the 1 from your arm will not slide into the water boiler arm. None of the mention parts are mine. And I am in no way saying they are the exact ones you may need. Cheers jon.

This believed to be the same parts/ fitment 253040239418

Just a quickey search 322510583198 caliper and mount + mc etc

Arm was a 95 sorry.

Calipers mount is 75mm. At wheel spindle is approx around 250mm + this is how I have it unless I've done something wrong.

My 750 braced arm has the notch on the inside of the arm for the caliper mount. I believe it's a 93 arm. Can post some pics if it helps.

Rf calipers work as they use the same mount. You also need the linkage and dog bones. I believe. Doing this swap myself. The arm is alot wider at the wheel end so unless you use the water boiler wheel (5.5 width) and the matching spacers you may need to make some for your wheel to work. I'm wanting to find a multi spoke wheel to try and match my r1 front end if any one knows of anything.

Thanks for that.

@davecara Do you know if I would be better of running a v sump on my b12 750 or will the original b12 sump be fine. It's a mk2 if that makes any difference.

You are a top man. Much appreciated. Cheers

@davecaraWould you be able to measeure the diamiter of the tube/pipe engine side of the welds circled. Looking to make them into a twin can setup. Should be circled in the pic. Cheers jon

Top job thanks for doing that. Cheers jon

Are they forsale on hear?? Im looking to see if the cans I have will work before I purchase.

Nice one. I take it that the link pipe or can will be a slip over style aswell. Cheers

Hi all could some 1 tell me the outlet diamiter of the gsxr 1000 k1-4 headers that fit our oilcooled motors. Cheers jon