Swirl Posted February 12, 2016 Posted February 12, 2016 A mate of mine has a 91 gsx1100g, fork stantions are gossed, any idea on compatible stantions, are 1100f the same, or are 1100f full forks legs the same, I know gsx1100f and gsx1100g share the same stem, bearings, spindle and fork diameter, where after a straight fork leg swap if poss, thanks Swirl Quote
Rene EFE Posted February 12, 2016 Posted February 12, 2016 No, G forks are totally different, as in, REALLY long. I've owned one for a bit and that had been in a smash. Owner replaced the tubes and I've seen the reciept for it, very expensive fix (especially as I got the bike for 100€) Either way, I did some research to see if he had overpaid and it turned out he did. There's a German company I found that do replacements for not more than any other fork would cost. Quote
wraith Posted February 13, 2016 Posted February 13, 2016 The gsx1100f has a 16" front wheel and the gsx1100g has a 18" I believe, if it was me as the standard front end are hard to get look out for a b12 front end but the wheels will not match. Quote
Swirl Posted October 10, 2016 Author Posted October 10, 2016 Still on the look out for some forks for this, rocking horse shit and hens teeth spring to mind, if I don't find any forks I think it will become a trike doner Quote
Gixer1460 Posted October 11, 2016 Posted October 11, 2016 8 hours ago, Swirl said: Still on the look out for some forks for this, rocking horse shit and hens teeth spring to mind, if I don't find any forks I think it will become a trike doner Trikes still need forks! What about adapting some MX forks - plenty length there.....and strong! Quote
Swirl Posted October 11, 2016 Author Posted October 11, 2016 its not for a trike mate, I've got the teapot trike with the 1127 powerscreen motor in it with the powers reen front end on it, the 1100g is a bike, used to belong to a mate but I bought it off him, to go in the stable with the rest of them, Chevy v8 trike, powerpot trike, Gsx1100g, 650kat, gs750, 2x vf750f, 76 Z9 A4, Harris Mag 2 Z9, Z750E, all various states of repair or disrepair depending on how you look at it Quote
busa ash Posted October 11, 2016 Posted October 11, 2016 is it a bent leg or need re chroming ? Quote
SiBag Posted October 11, 2016 Posted October 11, 2016 If its just the chrome, and you want to keep original forks why not just get them re-chromed. There are a few places doing it. I know of Dynasurf over in Sandbatch area for starters. http://www.dynasurf.co.uk/ Quote
busa ash Posted October 11, 2016 Posted October 11, 2016 these are who most advise also http://www.pittedforks.co.uk/ Quote
KATANAMANGLER Posted October 11, 2016 Posted October 11, 2016 You might find these articles useful. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.