Special headstock bearing

[baldrick]

Hi, does anyone know the number of, or have a link.

Looking to fit later model gsxr front end (gsxr 600/750 k7,8,9,L0) into 1100m

 

I've been on all balls site but can't see anything. 

Thanks

[Upshotknothole]

You want the fork conversion link on the side of their page.  These should be the ones you want.

Top 99-3540-5

Bottom 99-3519-5

[Duckndive]

I used 30x 47 x 12 ...for 2010 into kat 

[Gsxrsam]

32006 standard bottom taper bearing fits......

[Joseph]

stock bottom and as @Duckndivesaid but you need to make a 3mm spacer to catch up the height, since unfortunately 30x47x15 doesn't exist

[Duckndive]

6 minutes ago, Joseph said:

stock bottom and as @Duckndivesaid but you need to make a 3mm spacer to catch up the height, since unfortunately 30x47x15 doesn't exist

There was a couple of shims / spacers with the bearing from All Balls 

[Joseph]

30 minutes ago, Duckndive said:

There was a couple of shims / spacers with the bearing from All Balls 

oh well thats nice of them 

Edited June 6, 2023 by Joseph

[spiderpig]

Last one I bought through the Canadian? Sv crowd needed a massive relief cut in the bearing cup for you be able to knock them back out... I just get stems made up for swaps now 

[coombehouse]

The special top bearing is available on Eblag 

30x47x12 bearing number 32906x

https://www.Eblag.co.uk/itm/Tapered-roller-bearings-30x47x12-mm-/291457610520?mkcid=16&mkevt=1&_trksid=p4429486.m46890.l6249&mkrid=710-127635-2958-0

Edited June 7, 2023 by coombehouse
Link added