Chay Posted October 24, 2022 Posted October 24, 2022 Wondering if these ape covers can be machined to take a sight class.ive seen some that have but maybe they came like that Quote
Arttu Posted October 24, 2022 Posted October 24, 2022 Mine came without sight glass hole so I drilled it by myself. Or actually a friend of mine drilled. So yes, it can be machined. Quote
Reinhoud Posted October 25, 2022 Posted October 25, 2022 I made one myself. The biggest challenge was to find a pipe, or whatever, what goes over the basket.. Quote
Reinhoud Posted October 25, 2022 Posted October 25, 2022 Your main problem is the clutch controler, or whatever you want to call it.. When you make the clutch hydraulic it shouldn't be a problem. Quote
Dezza Posted October 25, 2022 Posted October 25, 2022 Given the amount they cost, it wouldn't exactly kill APE to install a sight glass during manufacture Quote
Reinhoud Posted October 25, 2022 Posted October 25, 2022 I can make something for you, but it's then made from steel, and you'll need an hydraulic controlled clutch. Take of the part where the clutch control is in, bolt on a steel brim, not very big, with lexan bolted in it. Quote
Chay Posted October 25, 2022 Author Posted October 25, 2022 43 minutes ago, Dezza said: Given the amount they cost, it wouldn't exactly kill APE to install a sight glass during manufacture Yeah plus new bearings,seal and the spindle from your old cover. Think the bandit gsxr sight glass might fit Quote
Arttu Posted October 25, 2022 Posted October 25, 2022 36 minutes ago, Chay said: Think the bandit gsxr sight glass might fit I used a GSX sight class but I guess the Bandit/GSX-R one is very similar if not the same. Quote
Chay Posted October 25, 2022 Author Posted October 25, 2022 Ta Arttu Will measure them as see what's best before I order from fowlers Quote
dago Posted October 25, 2022 Posted October 25, 2022 I bought a new sight glass & took them to a local engineering place and they machined it for me Quote
Duckndive Posted October 25, 2022 Posted October 25, 2022 (edited) 20 hours ago, Chay said: Wondering if these ape covers can be machined to take a sight class.ive seen some that have but maybe they came like that There actually made by an Australian Co .APE are just a distributor .. the one you show is the latest version which can also be purchased with a sight glass installed from some ... As has been said the Oil boiler one is a good fit there is also a bad "H" word bolt in one that i have seen used "but it looks crap" Edited October 25, 2022 by Duckndive Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.