Kn76 Posted September 30, 2020 Share Posted September 30, 2020 Does anybody know a head gasket supplier or the size needed? Quote Link to comment
Swiss Toni Posted September 30, 2020 Share Posted September 30, 2020 You might try Big CC, Roger Upperton ect? Quote Link to comment
Kn76 Posted October 1, 2020 Author Share Posted October 1, 2020 Always one of the old gaurd that helps, cheers swiss Quote Link to comment
clivegto Posted October 1, 2020 Share Posted October 1, 2020 Grumpy 1260 Suzuki performance spares Quote Link to comment
banoffee Posted October 1, 2020 Share Posted October 1, 2020 A forum member... @gsxr884 1 Quote Link to comment
canamant Posted October 6, 2020 Share Posted October 6, 2020 It's not too hard to make your own copper gasket which can be annealed and used several times. Quote Link to comment
Bow Posted October 11, 2020 Share Posted October 11, 2020 I get mine from Nick @ Suzuki performance spares. GSXR750 85-87 771cc big bore MLS head gasket, 71mm bore Quote Link to comment
gsxr884 Posted December 9, 2020 Share Posted December 9, 2020 884 kit on a 749 is a 76mm bore, same as an 1127. I use 1127 head gaskets for mine , either OEM or Athena with a thin application of Wurth Flange sealer(or Wellseal) as recommended by Richard Albans at TTS Quote Link to comment
Gixer1460 Posted December 9, 2020 Share Posted December 9, 2020 6 hours ago, gsxr884 said: 884 kit on a 749 is a 76mm bore, same as an 1127. er! - 1127 engine std is 78mm bore ! Quote Link to comment
TonyGee Posted December 9, 2020 Share Posted December 9, 2020 On 10/6/2020 at 1:04 AM, canamant said: It's not too hard to make your own copper gasket which can be annealed and used several times. i had a chop with a gsx 1260 engine in it that had blown the head gasket, i couldn't find a new one at the time so i made one from copper sheet. i was dead chuffed with it i didn't want to put it on the engine Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.