hussey1 Posted October 24, 2015 Author Share Posted October 24, 2015 Has anyone done this swap putting the Gsxr1100/banidt1200 engine in the GSX750es frame?I've found this thread where it says the tank needs to be modified as once the engine is in the tank sits too high on it http://www.oldskoolperformance.com/forum/viewtopic.php?f=6&t=1833 You won't need to brace your frame if you not gonna use your bike like a lunatic. Like a teaser of a similar bike? 7.5 Yoshi engine though... That's a nice bike seen that online before, is there a build thread/details anywhere do you know? Quote Link to comment
Pedda Posted October 24, 2015 Share Posted October 24, 2015 Iirc there was an article in a German bike mag back in the day 'bout that bike which was good enough to win trophies a few years back. That engine was a find under the counter at a former Suzuki dealer who used to support a race team. Not sure if I can find that article - must trawl through the basement. Quote Link to comment
hussey1 Posted October 24, 2015 Author Share Posted October 24, 2015 No problem, thank you. I will now be on a hunt for a 750 oil cooled engine now. Quote Link to comment
snoorder Posted October 24, 2015 Share Posted October 24, 2015 Mine's further back to have the sprocket closer to the swingarm. Have collars on the exhaust to make up the gap, works a treat but means more measuring. Same here with the similar Kawasaki Z1000 frame Quote Link to comment
Peterrr Posted October 24, 2015 Share Posted October 24, 2015 I currently building an oil cooled 750 engine in my popup katana, (same frame as the 750ES) If you want I can measure the engine brackets for you.Fits perfectly, biggest problem so far is the fuel tap that is too close to the carburator.. working on that.. 1 Quote Link to comment
hussey1 Posted October 24, 2015 Author Share Posted October 24, 2015 Thank you Peter,If you could measure the engine mounts and let me know the measurements that would be excellent thank you I can then draw them up at work on CAD and give you a copy of the drawing too if you would like. Quote Link to comment
Peterrr Posted October 24, 2015 Share Posted October 24, 2015 Copy of the drawing would be great, will measure them tomorrow, or sometime next week. Oh and I've had to remove one frame mount, the one by the side stand, I don't have a replacement for that (yet) 1 Quote Link to comment
hussey1 Posted October 25, 2015 Author Share Posted October 25, 2015 Copy of the drawing would be great, will measure them tomorrow, or sometime next week. Oh and I've had to remove one frame mount, the one by the side stand, I don't have a replacement for that (yet) Thank you. Yes I did think when I was looking at that mount yesterday for @Cobby that it would probably need to be removed. I guess it just needs a new piece welding on slightly further out as its on the inside of the frame currently. Quote Link to comment
markfoggy Posted October 25, 2015 Share Posted October 25, 2015 I currently building an oil cooled 750 engine in my popup katana, (same frame as the 750ES) If you want I can measure the engine brackets for you.Fits perfectly, biggest problem so far is the fuel tap that is too close to the carburator.. working on that..WP Swinger, that's cool. 1 Quote Link to comment
hussey1 Posted October 28, 2015 Author Share Posted October 28, 2015 Big thank you to @Peterrr for the dimensions of the engine brackets Quote Link to comment
Swiss Toni Posted October 28, 2015 Share Posted October 28, 2015 Get them posted up then. Shy boys get no cake! 1 Quote Link to comment
Peterrr Posted October 28, 2015 Share Posted October 28, 2015 Big thank you to @Peterrr for the dimensions of the engine brackets You are welcome, hope it works for you too.Looking foreward to the CAD drawing Quote Link to comment
Scotty750 Posted October 31, 2015 Share Posted October 31, 2015 Sorrry to be rude, but don't suppose I could get a copy of them drawings? Putting a 750M engine into my ES Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.