Cure for dragging clutch 1100 m

[fredbcj]

What's the cure for a dragging clutch on a 1100 slingy, is the pushrod worn? 

[Oilyspanner]

Likely the clutch and or the slave cylinder seals aren't doing their job - mine started to do this last year,  fitted new seals in both and all was good again. Fresh fluid and a good bled  are a must too, any air will make the clutch drag.

[clivegto]

Could also be warped clutch steels.

Edited August 9, 2019 by clivegto

[fredbcj]

Thanks for the info, appreciated, I will take a look this weekend 

[jonny1bump]

Or clutch basket notched from the plates

[fredbcj]

I will give it a look at this weekend, has anyone had issues with ebc clutch plates, a set came with the bike, but previous owner said he was recommended not to use, I've never had any issues, everyday road use

[Gixer1460]

You've been lucky then as most people have problems - generally slippage and / or dragging!

[manden]

17 hours ago, jonny1bump said:

Or clutch basket notched from the plates

+1

 

Haven't heard the seals before but could be so

[wobblegob]

ebc clutch plates are known to drag

 

[Goo'Roo]

1 hour ago, wobblegob said:

ebc clutch plates are known to drag

 

Not anymore. I've started to use them again in my workshop since 3-4 years and I've never had that problem again.

[wobblegob]

ok, i stand corrected. i always had an issue on suzuki's but not on kawasaki's lol