-
Posts
8,317 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by clivegto
-
Not to bothered mate, fitted one to the Turbo Scratcher in spring, works a treat. No tunels or tall buildings round hear to upset it lol
-
Mk4 regulator bracket, makes it 5mm higher and brings it 6mm closer to the sub frame from where I started with mk1 bracket. This gives clearance for all 4 pipes as well as room to adjust the top locking mut.
-
-
I need reading glasses nowadays. I can see the speed on the rx3 without them, most the other nice ones I can not.
-
-
Busa rear wheel spacers
clivegto replied to Captain Chaos's topic in Water Cooled, V-Twins, Singles and 2-strokes
Your welcome. -
No the bottom return pipe then points directly at the subframe.
-
-
Busa rear wheel spacers
clivegto replied to Captain Chaos's topic in Water Cooled, V-Twins, Singles and 2-strokes
-
Busa rear wheel spacers
clivegto replied to Captain Chaos's topic in Water Cooled, V-Twins, Singles and 2-strokes
Mk1 busa caliper hanger is about 29mm wide. -
Busa rear wheel spacers
clivegto replied to Captain Chaos's topic in Water Cooled, V-Twins, Singles and 2-strokes
-
Busa rear wheel spacers
clivegto replied to Captain Chaos's topic in Water Cooled, V-Twins, Singles and 2-strokes
-
Busa rear wheel spacers
clivegto replied to Captain Chaos's topic in Water Cooled, V-Twins, Singles and 2-strokes
Got a TL wheel which is the same & it has spacors but don't know if the spacors are the same as mk1 busa. Can measure them if you like. -
Another little bracket to fit the malpassi fuel pressure regulator. Fits nicely inside the left of the seat unit.
-
No on OSS it's not.
-
So I drilled lost of holes in the box part of the bracket to match the other brackets. Put 2 m8 threads in the bottom to fasten it to existing brackets. Tided the boost gauge bracket up as well as the box. Trimed the bolts up in the lathe. Thinking of sticking a little Suzuki badge on the clock bracket.
-
Even though the koso clock's come with a fitting bracket I still need to fit it to the bike along with the boost gauge. Started to make a fixing bracket out of 50x25mm aluminium box & a bit of steel flat bar. Still needs finishing off but am happy with it so far.
-
Have ordered the plug in gps for it as well.
-
-
-