-
Posts
302 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by snoorder
-
I've seen a guy on FB put a GSX 1400 arm in it. No clue about the measurements though...
-
Thanks agian, I have to get me another 1990 frame then! Cheers
-
Thanks guys. The thing is, I have a 1990 750L track bike. And by now almost enough spare parts to build another bike. So I am looking for a frame. If I understand correctly the 91 subframe is wider so probably my 90 bodywork will not fit?
-
Anybody out there who can tell me if the 88 till 91 750 Slingshot frames are the same and if not, what are the differences. I believe 88/89 are the same and 90/91 are the same. No clue if I am right.. Thanks in advance!
-
Nope just a tourist in the free series ;-)
-
I was there as well (riding in the Series). Didnt know this in advance, cool!
-
Srad 750 Gsxr1000 Engine Swap
snoorder replied to Leblowski's topic in Water Cooled, V-Twins, Singles and 2-strokes
Nice, you make this sound like an easy build mate -
Any news on fitting the Street Triple 675 R wheels? I can get my hands on a set for a reasonable price. Thanks in advance!
-
Great job I'll pm you when they have arrived. Cheers
-
PM sent, thanks
-
Snoorder voted for 4. If posting to NL is possible
-
All four fell out with me!
-
Thanks! Next job is to figure out a way to prevent them from dropping out again.
-
-
Ok guys, here's one for you. Upon cleaning and overhauling the Mikuni 38 mm carburators of my 1990 GSX-R 750 I found a tiny nozzle just lying in the float chamber. Below are some crappy pictures. I am quite sure these parts are supposed to be somewhere inside the carbs instead of swimming in the float chambers. But where, and what does it do? I can't seem to locate where they should go. Thanks in advance!
-
I have one Didn't do more then a K&N replacement airfilter and Yoshimura can (ment for a B12) but seems to run better already!
-
https://link.marktplaats.nl/m1233029301
-
It's actually not a Bandit but a GSX 1200 Inazuma
-
Engine is the same as Bandit 1200. Carb size might be smaller, not sure. Wheels and discs are probably Bandit aswell. Forks and obviously swingarm are not. Clocks look like Bandit but they are not. Levers are the same as used on a lot of Suzuki's. Exhaust downpipes look like they are Bandit but I am not sure if the are. I have tried several Bandit 1200 aftermarket mufflers with linkpipe (Arrow and Yoshimura) and they fit. One mod I would definitely recommend is increasing the ride height on the rear. I used a pair of ZRX1200 adapter blocks (+40mm) for that. And although 40 mm is quite a lot it does improve the handling (and looks).