need help finding oversized valves

[mx13]

Hello

I'm recently rebuilding my 1100N, i go to 1216cc also had oversized INTAKE valves, but i cant finf EXHAUST ones - also oversized. I had an idea to try to fit Busa's ones but they need some extra machine to fit them. Any one tryed something like this ?

Thanks in advance

Regards Martin

Edited August 12, 2018 by mx13

[Duckndive]

20 minutes ago, mx13 said:

Hello

I'm recently rebuilding my 1100N, i go to 1216cc also had oversized INTAKE valves, but i cant finf EXHAUST ones - also oversized. I had an idea to try to fit Busa's ones but they need some extra machine to fit them. Any one tryed something like this ?

Thanks in advance

Regards Martin

use some stock inlet valves in the exhaust

 

[johnr]

1 hour ago, Duckndive said:

use some stock inlet valves in the exhaust

 

up here for thinking, down there for dancing....

[mx13]

16 hours ago, Duckndive said:

use some stock inlet valves in the exhaust

 

Are inlet good for exhaust , I mean thermal load ?

[Gixer1460]

17 hours ago, Duckndive said:

use some stock inlet valves in the exhaust

They'll be a bit cosy at the seats - 26mm is usual oversize. Of course, offset guides are an option - not cheap or DIY though!

[manden]

On 8/12/2018 at 9:19 PM, mx13 said:

Hello

I'm recently rebuilding my 1100N, i go to 1216cc also had oversized INTAKE valves, but i cant finf EXHAUST ones - also oversized. I had an idea to try to fit Busa's ones but they need some extra machine to fit them. Any one tryed something like this ?

Thanks in advance

Regards Martin

i found some on Eblag. not even that expensive

Edited August 13, 2018 by manden

[manden]

it wonte write e b a y

[Blubber]

17 hours ago, manden said:

it wonte write e b a y

We know.

It's a script...some words are alterered.

Try typing other bike brand names 

[mx13]

hello 

I couldn't find any in Egay 

[johnr]

273093304427

[mx13]

I'm looking for exhaust valves and M&N models shim style ones - short tip valves 

[Oilyspanner]

I think it's G and S valves that list a load of products, including 1100M/N - I'm intrigued as they list the 30mm inlets at the same weight as standard 28.5mm ones..... I'm thinking about them for another project.