Bubba1135 Posted February 3, 2020 Posted February 3, 2020 You did indeed, but it's got character and it looks like a 90's shellsuit . F@#king well flies now though 1 Quote
Bubba1135 Posted April 23, 2020 Posted April 23, 2020 On 2/3/2020 at 9:17 PM, vizman said: I told you not to buy it. You were right, it's still being a twat. Quote
vizman Posted April 23, 2020 Author Posted April 23, 2020 I feel your pain dude.....sell it to some mug....like me or you. 1 Quote
Bubba1135 Posted April 24, 2020 Posted April 24, 2020 Had it all sorted, think one of the coils has packed in now, might buy some new Dyna's for the EFE and put the old green ones on RF not sure about the el cheapo ones on the bay of E. 1 Quote
Bubba1135 Posted August 26, 2020 Posted August 26, 2020 Sorted the coils, fitted new Hyperpro fork springs, seal & bushes, discs & pads arriving today. But on the plus side did about 275 mile in one day at the weekend with no major issues on a flying visit to the Kingdom of Fife @KATANAMANGLERi waved twice on the way past yours, would have called but it was pishing down and was on a mission. 4 Quote
vizman Posted August 26, 2020 Author Posted August 26, 2020 Glad to here it’s ‘working’.....hope it stays that way. i still fooking hate it. 1 Quote
Bubba1135 Posted August 26, 2020 Posted August 26, 2020 (edited) 4 hours ago, vizman said: Glad to here it’s ‘working’.....hope it stays that way. i still fooking hate it. Its really growing on me , thinking of changing the wheel colour for burnt metallic orange though Edited August 26, 2020 by Bubba1135 added more text Quote
gmansyz Posted September 23, 2020 Posted September 23, 2020 What an adventure! I used to like the back end pf all things but NO, will not get one. As I had been thinking of one as they are not very desirable here in the states. Laters G Quote
manden Posted September 29, 2020 Posted September 29, 2020 has any one tried one with gsxr cams in it+ is it worth the money and effort or must it be real cams to make a decent difference? sry for the hijack but seemes like the place to ask Quote
Joseph Posted October 4, 2020 Posted October 4, 2020 (edited) I've seen US forum topics claiming +10 HP with 7RW cams in, with the power curve pushed up the rev range Edited October 4, 2020 by Joseph Quote
Bubba1135 Posted October 25, 2020 Posted October 25, 2020 Head bearings, fronts discs, pads and beer, got a fair bit done yesterday 2 Quote
vizman Posted October 25, 2020 Author Posted October 25, 2020 I’ll give you the petrol to burn it 3 Quote
Askamaskinservice Posted October 25, 2020 Posted October 25, 2020 2 hours ago, vizman said: I’ll give you the petrol to burn it You still have a grudge for it..... Quote
Bubba1135 Posted October 26, 2020 Posted October 26, 2020 12 hours ago, vizman said: I’ll give you the petrol to burn it You know you miss it 3 Quote
manden Posted October 28, 2020 Posted October 28, 2020 On 10/4/2020 at 4:21 PM, Joseph said: I've seen US forum topics claiming +10 HP with 7RW cams in, with the power curve pushed up the rev range sounds like decent 80€ upgrade then. Quote
Bubba1135 Posted January 30, 2021 Posted January 30, 2021 Another years ticket on Viz's favourite bike 1 Quote
Bubba1135 Posted July 17, 2021 Posted July 17, 2021 Corbin seat, re-covered by DP Leathers Penrith, can't recommend him highly enough. 8 Quote
Bubba1135 Posted October 23, 2021 Posted October 23, 2021 Back to its usual state of affairs...in bits, only for a service, check valve clearances, new fuel hoses as ones perished and replacing a couple of damaged wires. 1 Quote
Physician Posted May 23, 2022 Posted May 23, 2022 How is it going? Any updates? Did you have to mess with jetting going to the gsxr ti header? Quote
Bubba1135 Posted May 24, 2022 Posted May 24, 2022 It's sitting kinda abandoned at the moment, carbs have been stripped, cleaned, rebuilt with new slide guides, emulsion tubes & full gasket set, just need fitted & balancing. Been busy with my EFE so this has been on hold. 1 Quote
Physician Posted May 30, 2022 Posted May 30, 2022 Priority changes! New slide guides? Like brand new? If so, where did you find those? Quote
Bubba1135 Posted June 13, 2022 Posted June 13, 2022 On 5/30/2022 at 9:31 PM, Physician said: Priority changes! New slide guides? Like brand new? If so, where did you find those? NRP Carbs they sell the guides Quote
Bubba1135 Posted March 26, 2023 Posted March 26, 2023 Bit of work on the RatFink, shock & dogbones out, cleaned & refitted, new chain, hugger fitted, stripped, refurbished & cleaned carbs refitted, fuel pump cleaned , new fuel lines & filter fitted, airbox back on fuel in, racefit endcan fitted......batteries effed so off to eb#y we go...£23 for a new battery, wish the EFE one was that cheap. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.