CockneyRick Posted March 19, 2018 Share Posted March 19, 2018 So my question is, given a std untouched oil cooled lump, in order what are the outputs for these & preferences for road/race/drag? Just curious as the lump i have is from the GSX1100F totally standard to be used for RWYB, until pennies allow some fettling Quote Link to comment
wraith Posted March 19, 2018 Share Posted March 19, 2018 I have a gsx1100f in my kat with 38 mm carbs and I'm very happy with it on the road, but if your tuning one (I'm told of someone how draged one) you can't go above 200bhp because of the crank cog between it and the clutch let's go in a big way. He was running 1340cc with nos. Quote Link to comment
CockneyRick Posted March 19, 2018 Author Share Posted March 19, 2018 Doubt my pockets will ever be that deep Quote Link to comment
Solcambs Posted March 19, 2018 Share Posted March 19, 2018 Don't know much about the 1157 ... but when I looked for a lump for the Kat I opted for the 1127 from an M/N. My rationale was that the port shapes were already better, they matched the 38mm Mikuni or 39 Keihin flat slides better. They have no options for cams without spending stupid wonga with Yoshimura, but the followers don't like it anyhow. However they respond very well to cubes - so as a base for a 1216 they do well. They do not need valve work, as the valves are large enough to flow enough for good power and torque. They can be retro fitted with a spring clutch from the earlier models, as the diaphragm clutch is week - comparatively - but still good for 150 hp. The 1052 is probably equally good, but needs more headwork (relatively) to run flat slides and does not flow quite s well as the later models. Quote Link to comment
Oliekoel Posted March 20, 2018 Share Posted March 20, 2018 I put three diafragma springs in for clutch But... Why not the dothead conversion? Shouldnt iT Also be considered? Quote Link to comment
Oliekoel Posted March 20, 2018 Share Posted March 20, 2018 (edited) Got me a 1157 lump but .... don’t fit in an 88 750 frame or i Just havent seen the light yet got me an 1127 90 and 92 1127 Some say the valvethingy is better on the 90...but valves aint my mission yet And i finally realized one thing.... if its money? But you want to go fast? use a 1127F lump and nos the shite out of iT! So now i changed plans and bought me an extra 1127F for later plans .... in a millions years offcourse but Hey we Will get there sometime Edited March 20, 2018 by Oliekoel Don’t know Why font changed sorry Quote Link to comment
CockneyRick Posted March 20, 2018 Author Share Posted March 20, 2018 4 hours ago, Oliekoel said: I put three diafragma springs in for clutch But... Why not the dothead conversion? Shouldnt iT Also be considered? No, cos the question was for a stock engine to start with! Quote Link to comment
Swiss Toni Posted March 20, 2018 Share Posted March 20, 2018 Have you considered the 1127 Teapot engine, Rick? Loads of power ... and pretty cheap! Quote Link to comment
CockneyRick Posted March 20, 2018 Author Share Posted March 20, 2018 As said, i have a GSX1100F (1127) already. Just thinking out loud & whether in the future to change it, before the spanners start to spin Quote Link to comment
vizman Posted March 20, 2018 Share Posted March 20, 2018 i guess it comes down to what you're using it for and what you're wanting to achieve..... if it's a run whatcha' brung drag bike, play around with your sprockets and your 'gusto' off the line if you have a particular 'class' in mind for competing....well....that'd help with answering what to start with and just how poor you will become.... (btw powder coating and skulls won't make your bike any quicker) 4 Quote Link to comment
CockneyRick Posted March 20, 2018 Author Share Posted March 20, 2018 No but it sure makes it look Purty Quote Link to comment
Leblowski Posted March 20, 2018 Share Posted March 20, 2018 Used an F engine for three years 240 bhp 240 nm torgue took three years to destroy the crankspacers but apart from that no problems 1 Quote Link to comment
CockneyRick Posted March 20, 2018 Author Share Posted March 20, 2018 Looks like the lump i have will do fine Quote Link to comment
clivegto Posted March 20, 2018 Share Posted March 20, 2018 2 hours ago, Leblowski said: Used an F engine for three years 240 bhp 240 nm torgue took three years to destroy the crankspacers but apart from that no problems In those 3 years how many miles did the bike do ? Quote Link to comment
wraith Posted March 20, 2018 Share Posted March 20, 2018 5 hours ago, CockneyRick said: Looks like the lump i have will do fine Yes the 1127 power screen are a good motor, the one in the kat has never let me down and has plenty of go in it and you can tweak them. Don't go for the 1052 motors, I blew up 3 of them 2 standard one and one big bore each time put the con rod through the crank cases Quote Link to comment
Leblowski Posted March 20, 2018 Share Posted March 20, 2018 4 hours ago, clivegto said: In those 3 years how many miles did the bike do ? I honestly haven’t got a clue it took me to the Uk and back multiple times been to france, germany and the occasional ride outs. Probably around 15000 20000 km maybe more. 1 Quote Link to comment
Swiss Toni Posted March 20, 2018 Share Posted March 20, 2018 Pretty bulletproof then! Quote Link to comment
clivegto Posted March 20, 2018 Share Posted March 20, 2018 @Leblowskithought it would be lots with you Quote Link to comment
Leblowski Posted March 20, 2018 Share Posted March 20, 2018 17 minutes ago, clivegto said: @Leblowskithought it would be lots with you If it would be 10000 km stil good enough imho 1 Quote Link to comment
Leblowski Posted March 20, 2018 Share Posted March 20, 2018 Must say that i had problems with clutchdrag with this engine always a problem to get it in neutral when standing still, i did the suzuki factory mod wich made it a bit better. But if i could choose i would never use an F engine again cause of the clutchdrag problems. After the f engine i used two R engines in my bikes wich never had that problem. The helical gear also takes away about 15% of your power (hear say) 1 Quote Link to comment
1100fred Posted March 21, 2018 Share Posted March 21, 2018 I’ve got a gsx1100f engine That’s got a dragging clutch can you tell me what the Suzuki mod for it is thanks Quote Link to comment
wraith Posted March 21, 2018 Share Posted March 21, 2018 2 hours ago, 1100fred said: I’ve got a gsx1100f engine That’s got a dragging clutch can you tell me what the Suzuki mod for it is thanks New plates 1 Quote Link to comment
Leblowski Posted March 22, 2018 Share Posted March 22, 2018 (edited) 7 hours ago, wraith said: New plates Installed a new basket steel an fiber plates did not work Edited March 22, 2018 by Leblowski Quote Link to comment
Leblowski Posted March 22, 2018 Share Posted March 22, 2018 9 hours ago, 1100fred said: I’ve got a gsx1100f engine That’s got a dragging clutch can you tell me what the Suzuki mod for it is thanks The problem is that there’s to much oil in the clutchbasket wich causes drag. If you take away some meat at the back of the basket the oil gets out easier. It’s a perscribed suzuki factory mod for dealers wich i found at the web a few years a go cant find it now but will try. 1 Quote Link to comment
clivegto Posted March 22, 2018 Share Posted March 22, 2018 That's interesting & makes sence. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.