Wagola Posted October 23, 2017 Posted October 23, 2017 Hi All, Will a set of Bandit 1200 cams fit into a Slingshot GSXR1100 engine ? Looking at getting a spare set of cams to re-grind and not many GSXR1100 cams seem to come on to the market. Advice appreciated. Thanks Quote
clivegto Posted October 23, 2017 Posted October 23, 2017 Yes they will fit you just need to change the cam sprockets over. Quote
Del Posted October 23, 2017 Posted October 23, 2017 47 minutes ago, Wagola said: Hi All, Will a set of Bandit 1200 cams fit into a Slingshot GSXR1100 engine ? Looking at getting a spare set of cams to re-grind and not many GSXR1100 cams seem to come on to the market. Advice appreciated. Thanks What Gsxr1100 do you have? As 1100k/l are screw/locknut and 1100m/n are shim heads. If 11m/n,then b12 cams won't fit Quote
Wagola Posted October 23, 2017 Author Posted October 23, 2017 Hi Del, Its an L model engine with screw/locknut valve adjustment. That's why I thought the bandit cams might fit. Quote
Wagola Posted October 23, 2017 Author Posted October 23, 2017 23 minutes ago, clivegto said: Yes they will fit you just need to change the cam sprockets over. So the cam sprockets aren't the same ? Quote
clivegto Posted October 23, 2017 Posted October 23, 2017 (edited) No but as I said just swap them over. Different types of cam chain. For better results get them slotted & daile them in. Edited October 23, 2017 by clivegto Quote
Wagola Posted October 23, 2017 Author Posted October 23, 2017 To be truthful it was the slotted sprockets I was after as well. There's a set on Eblag from a bandit with slotted sprockets. I guess these won't fit a say what now!? ? Quote
dupersunc Posted October 26, 2017 Posted October 26, 2017 On Mon Oct 23 2017 at 7:32 PM, Wagola said: To be truthful it was the slotted sprockets I was after as well. There's a set on Eblag from a bandit with slotted sprockets. I guess these won't fit a say what now!? ? Bandit cam sprockets are no good for a gsxr engine as the chain and crank sprockets aren't compatible. Quote
Wagola Posted October 26, 2017 Author Posted October 26, 2017 Hi Dupersunc, Thanks for your reply. Looks like I'll be looking for some GSXR1100L cams to get reground and then some slotted sprockets to suit. cheers 1 Quote
dupersunc Posted October 26, 2017 Posted October 26, 2017 1 hour ago, Wagola said: Hi Dupersunc, Thanks for your reply. Looks like I'll be looking for some GSXR1100L cams to get reground and then some slotted sprockets to suit. cheers You can swap the sprockets between cams. So bandit cams fitted with gsxr sprockets will work fine. Quote
Dezza Posted October 27, 2017 Posted October 27, 2017 Won't fitting the Bandit cams reduce the power of the GSXR motor? Or maybe more grunt lower down the rev range is needed? Quote
August17 Posted October 29, 2017 Posted October 29, 2017 Anyone know of a tool that will rivet a morse master link on a 1200 bandit camchain Quote
dupersunc Posted October 29, 2017 Posted October 29, 2017 I believe Ray Debben has the kit to do this. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.