Best 4pot master cylinder/brake set up

[R1guy]

I've got gsxr 1100 front end lined up for my Katana track bike, including the 4pot calipers.

 

What master cylinders have people had best results with these calipers?

Ill be using braided hoses. I know I could use the one Suzuki intended for them, but I'm open to suggestions?

[banoffee]

Running a K5 1000 radial one with mine, works well.

[Oilyspanner]

I go along with Banoffee - the radial m/cylinder from 1000 K5 - on, 750/600 K6 - on , work very well with the 4 pot Nissins and good HH pads.

 

[Dezza]

What are you allowed in the rules for your race class?

[dupersunc]

Brembo rcs.  

[R1guy]

Thanks for replies guys....

 

What piston sizes are all the m/cs that you've had sucess with?

[MeanBean49]

Ive found 19mm radial works really well. Goid feel and not much lever movement. 

Any conventional 5/8 master will work well too with good pads and braided lines

[dupersunc]

19mm here too.

[Blacknblue]

2006 ZZR1400 one works very well. Far better feel than stock. Not sure about clearance if a fairing is fitted though.

[suzook12]

Guess it all depends on preferences. I used the 750j/k remote res master, plenty of feel and enough power to stand her on her nose with 2 fingers on the lever.....

[dupersunc]

9 hours ago, suzook12 said:

Guess it all depends on preferences. I used the 750j/k remote res master, plenty of feel and enough power to stand her on her nose with 2 fingers on the lever.....

Yep they can, and I have done. But a decent modern radial requires so much less effort.