caferacerdan Posted May 16, 2017 Share Posted May 16, 2017 Anyone know if a 750 j frame with bandit 1200 motor wont overheat if i run a 16 row? motor is stock 1200 internals with just a full akro system and pods...19row measurements put it dangerously close clearance wise! 1 Quote Link to comment
dupersunc Posted May 16, 2017 Share Posted May 16, 2017 It'll be fine for road use. Bandit motors are lowish compression so don't generate so much heat. Quote Link to comment
fatblokeonbandit Posted May 16, 2017 Share Posted May 16, 2017 Ive had 16 row on several Bandits with no problems, 7 I think... i have 19 row on my 1216 big bore and its been fine 1 Quote Link to comment
no class Posted May 16, 2017 Share Posted May 16, 2017 When it comes to keeping an oil boiler cool..... there is no such thing as overkill..... 19 row will support more btu's than the 16..... make it fit . 1 Quote Link to comment
suzook12 Posted May 17, 2017 Share Posted May 17, 2017 I had a 19 row one on my 750J with B12 motor Quote Link to comment
caferacerdan Posted May 18, 2017 Author Share Posted May 18, 2017 ordered a 19 and lines, should be here monday Quote Link to comment
Paulm Posted May 18, 2017 Share Posted May 18, 2017 I ran a 21 row on my 750k/1100k 7/11, 16 row will be ok,I ran one on my turbo ET for a year or so,you shouldn't really have issues fitting a 19row,everyone uses them. 1 Quote Link to comment
caferacerdan Posted May 21, 2017 Author Share Posted May 21, 2017 took the wrong measurement straight after a nightshift in work...re measured the next day n realised I will have plenty of room! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.