clivegto Posted July 21, 2015 Share Posted July 21, 2015 Have these two 750 slabby arms one was sold to me of the bay of e as 1100 which it is not but which models are they from ? Quote Link to comment
Mar71n Posted July 21, 2015 Share Posted July 21, 2015 (edited) As you say they are both 750 arms but I have not seen one with such a long chain adjuster slot.The picture below is a 1100 arm, the bell crank mounting is solid as the roller bearing is in the crank pivot.There is a 750 arm in the back ground. Edited July 21, 2015 by Mar71n more detail Quote Link to comment
kokolis Posted July 21, 2015 Share Posted July 21, 2015 Both 750 m8.The 1100 has double allu ears, insted of sheet allu (750) Quote Link to comment
Pd1987 Posted July 27, 2015 Share Posted July 27, 2015 Both 750, that is very strange with the extended adjustment tho. Iv never seen it on any of my slabbys Quote Link to comment
Rene EFE Posted July 27, 2015 Share Posted July 27, 2015 Looks like someone made a mistake with calculating chainkenght and thought it was a good (cheap) idea to fix it that way. Very odd Quote Link to comment
canamant Posted July 31, 2015 Share Posted July 31, 2015 Not sure that the spindle would go that far forward without running into problems - like chain adjuster thread for a start. It would also cause the caliper to sit at an odd angle on the disc. It looks like they have even taken the trouble to replicate the adjuster marks too. Most odd. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.