DOT head on 1100 what plugs

[wraith]

Hi all putting a DOT head on my 1100 what plugs should I use?

The standard 750 dot head plugs or the standard 1100 plugs?

Thanks in advance

[clivegto]

Never thought of that with my one, used standard b12 on a 1052.

[Oilyspanner]

I was waiting for FBOB etc  who've done a few of these to call by - but I'm pretty sure all the folks who've fitted dot heads continued to use 1100 or 1200 plugs - as CGTO.

Running conditions are going to be very similar to the standard engine , slightly hotter because of the extra compression - but it's less than  a point of compression (close to .5) and in a big bore going up 2 points you still normally use the standard grade plug .

Good question though !

[fatblokeonbandit]

Ive done 2 DOT heads onto b12 engines and used all the B12 stuff, plugs valve clearances and all, both worked a treat.

[wraith]

Cheers all, just one them things you think of at about paint 3 when telling your mates  sad a.

[nightrider]

On 9/29/2016 at 1:01 AM, fatblokeonbandit said:

Ive done 2 DOT heads onto b12 engines and used all the B12 stuff, plugs valve clearances and all, both worked a treat.

B12 cams or 1100 or J/k 750?

[fatblokeonbandit]

750 dot j/k cams bkth times

[fatblokeonbandit]

Both dynod at over 130 rwhp, good cheap bolt on power for a b12 motor

[SiBag]

On ‎29‎/‎09‎/‎2016 at 9:01 AM, fatblokeonbandit said:

Ive done 2 DOT heads onto b12 engines and used all the B12 stuff, plugs valve clearances and all, both worked a treat.

Think that's what you told me Garry when I asked the same question on the old site. (or possibly the temp site)

[nightrider]

On 9/30/2016 at 2:20 PM, fatblokeonbandit said:

750 dot j/k cams bkth times

while were on the subject, are Slingshot DOT and Teapot DOT cams the same?

I have the Teapot DOT cams.

[fatblokeonbandit]

No, gsxrj/k are much more agressive, less midrange but much more top end fun

[nightrider]

ya, that's what I thought