I'm putting a donor B12 Motor in a Slabby 11 Roller.
B12 Gen. has different connections then Slabby Gen.
Can I just throw a 1052 Gen. (which I have loads of) or am I going to have to figure out the different wiring (I don't have a B12 Harness)?
Sorry for the high jack but all this seems to indicate that i can use gs1100 cams as cores for my gs1150 efe then. I have a set knocking around. I would rather send those in then my 1150 cams as they are in spec
I'm probably a little late on this thread but I have always used a product over rhere called gasket sinch. I've seen it under many different names and product lines. Its a dark purple sweet-ish smelling stuff with a rubber cement type consistency. Always comes in a little tin can with applicator brush attached to the inside of cap (Just like rubber cement). Works great. Been using it since the 80's
That's what I figured.
On second look I see those 6 holes in the case are actually going to the stater compartment.
Thought you came up with an interesting breather idea. Still like it, didn't accur to me.
Over the years I have learned so much from my fellow OSS inmates (since 08) it would be great to give something back.
I intend for my Plasti post to be for OSS eyes only so I will post it in my up coming "Track Slabby" build. I'll put it on the first page.