Im back

[zedhead]

I foresee a lot of people using the ES as a potential project, especially once they see how good yours looks with newer 17" three spokers etc...

 

[wobblegob]

There you go captain

[wobblegob]

Got a little more done on it today but having a dilemma with speedo cable the gsx750f one is too short and the es one is different fitting at the wheel. Any ideas chaps ?

[wobblegob]

Fitted the new gear indicator switch, headstock nut etc. Even had it down the road
 

Next job will be pull it to bits ready for powder coating etc ..........when I have the money

[Sam-Jaffa]

On 13/11/2016 at 5:55 PM, wobblegob said:

Got a little more done on it today but having a dilemma with speedo cable the gsx750f one is too short and the es one is different fitting at the wheel. Any ideas chaps ?

You can get universal Speedo cable extenders, I use one on mine, works a treat http://m.Eblag.co.uk/itm/NEW-SPEEDO-SPEEDOMETER-CABLE-EXTENDER-EXTENSION-200mm-LONG-M10-/191960310767?nav=SEARCH

[wobblegob]

Cheers for that jaffa will look into it

[wobblegob]

Right in bits ready for powder coating. But have found that the pick up Engine cover is badly cracked has anybody got a spare  for sale

 

[wobblegob]

Anybody know of any other shock that will fit this bike stock linkages etc don't mind if it jacks it up a little cheers chaps

Edited December 19, 2016 by wobblegob

[wobblegob]

Bits back from the powder coaters

[mcmental]

oooh shiny disco balls

 

[busa ash]

i like this stage in the re build 

[davecara]

Looking good so far! Be good to see it together 

[wraith]

Welcome back, just picked up on the build. Looking good.

[wobblegob]

Right chaps does anybody know if the cam cover bolts are the same as gsxr bolts ...........just thinking

[wobblegob]

Bit more done

[wobblegob]

[wobblegob]

Bit more done this Sunday in shedlife lol. Swingarm in, out, in, out, shake it all about  (forgot rear brake pivot needs to go in before swingarm )

[wobblegob]

But more done today. Doesn't look like much but getting there ..........slowly lol

[wobblegob]

Some pics from today's exploits

[wobblegob]

Right guy's getting royally pissed off with this at min. back together enough to run ( in the losest turns .......run ) its running on 1/4 cyls but not on 2/3 cyls. Good spark, compression all good, fuel getting to carbs (block a carb inlet with my hand ......hand full of fuel) but will not run on 2/3 any ideas pissing me off at minute

[jameskat]

Have you done the usual swap coils and leads?

[wobblegob]

Yep

[jameskat]

What do the spark plugs look like? Are they wet? 

[wobblegob]

A little damp ish but not pissed wet through

 

[jameskat]

Swap inside spark plugs to outside, make sure vacuum hoses are plugged, if the plugs were black then try lean off the two inside cylinders on idle mixture screws.