zedhead Posted October 25, 2016 Share Posted October 25, 2016 I foresee a lot of people using the ES as a potential project, especially once they see how good yours looks with newer 17" three spokers etc... 2 Quote Link to comment
wobblegob Posted October 26, 2016 Author Share Posted October 26, 2016 There you go captain 5 Quote Link to comment
wobblegob Posted November 13, 2016 Author Share Posted November 13, 2016 Got a little more done on it today but having a dilemma with speedo cable the gsx750f one is too short and the es one is different fitting at the wheel. Any ideas chaps ? Quote Link to comment
wobblegob Posted November 20, 2016 Author Share Posted November 20, 2016 Fitted the new gear indicator switch, headstock nut etc. Even had it down the road Next job will be pull it to bits ready for powder coating etc ..........when I have the money Quote Link to comment
Sam-Jaffa Posted November 20, 2016 Share Posted November 20, 2016 On 13/11/2016 at 5:55 PM, wobblegob said: Got a little more done on it today but having a dilemma with speedo cable the gsx750f one is too short and the es one is different fitting at the wheel. Any ideas chaps ? You can get universal Speedo cable extenders, I use one on mine, works a treat http://m.Eblag.co.uk/itm/NEW-SPEEDO-SPEEDOMETER-CABLE-EXTENDER-EXTENSION-200mm-LONG-M10-/191960310767?nav=SEARCH Quote Link to comment
wobblegob Posted November 20, 2016 Author Share Posted November 20, 2016 Cheers for that jaffa will look into it Quote Link to comment
wobblegob Posted December 11, 2016 Author Share Posted December 11, 2016 Right in bits ready for powder coating. But have found that the pick up Engine cover is badly cracked has anybody got a spare for sale Quote Link to comment
wobblegob Posted December 19, 2016 Author Share Posted December 19, 2016 (edited) Anybody know of any other shock that will fit this bike stock linkages etc don't mind if it jacks it up a little cheers chaps Edited December 19, 2016 by wobblegob Quote Link to comment
wobblegob Posted December 23, 2016 Author Share Posted December 23, 2016 Bits back from the powder coaters 6 Quote Link to comment
mcmental Posted December 31, 2016 Share Posted December 31, 2016 oooh shiny disco balls Quote Link to comment
busa ash Posted December 31, 2016 Share Posted December 31, 2016 i like this stage in the re build 1 Quote Link to comment
davecara Posted December 31, 2016 Share Posted December 31, 2016 Looking good so far! Be good to see it together 1 Quote Link to comment
wraith Posted January 1, 2017 Share Posted January 1, 2017 Welcome back, just picked up on the build. Looking good. 1 Quote Link to comment
wobblegob Posted January 6, 2017 Author Share Posted January 6, 2017 Right chaps does anybody know if the cam cover bolts are the same as gsxr bolts ...........just thinking Quote Link to comment
wobblegob Posted January 8, 2017 Author Share Posted January 8, 2017 Bit more done 5 Quote Link to comment
wobblegob Posted January 15, 2017 Author Share Posted January 15, 2017 Bit more done this Sunday in shedlife lol. Swingarm in, out, in, out, shake it all about (forgot rear brake pivot needs to go in before swingarm ) 3 Quote Link to comment
wobblegob Posted January 22, 2017 Author Share Posted January 22, 2017 But more done today. Doesn't look like much but getting there ..........slowly lol 1 Quote Link to comment
wobblegob Posted February 5, 2017 Author Share Posted February 5, 2017 Some pics from today's exploits 6 Quote Link to comment
wobblegob Posted February 8, 2017 Author Share Posted February 8, 2017 Right guy's getting royally pissed off with this at min. back together enough to run ( in the losest turns .......run ) its running on 1/4 cyls but not on 2/3 cyls. Good spark, compression all good, fuel getting to carbs (block a carb inlet with my hand ......hand full of fuel) but will not run on 2/3 any ideas pissing me off at minute Quote Link to comment
jameskat Posted February 8, 2017 Share Posted February 8, 2017 Have you done the usual swap coils and leads? Quote Link to comment
jameskat Posted February 8, 2017 Share Posted February 8, 2017 What do the spark plugs look like? Are they wet? Quote Link to comment
wobblegob Posted February 8, 2017 Author Share Posted February 8, 2017 A little damp ish but not pissed wet through Quote Link to comment
jameskat Posted February 8, 2017 Share Posted February 8, 2017 Swap inside spark plugs to outside, make sure vacuum hoses are plugged, if the plugs were black then try lean off the two inside cylinders on idle mixture screws. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.