Scuzz300 Posted September 25, 2022 Posted September 25, 2022 Afternoon all just wondering if anyone would know if a metmachex bandit 1200 mk1 arm would fit into a slab or 750 frame without too much bother hope to hear from anyone soon cheers Ian Quote
Scuzz300 Posted September 25, 2022 Author Posted September 25, 2022 Just now, Scuzz300 said: Afternoon all just wondering if anyone would know if a metmachex bandit 1200 mk1 arm would fit into a slabbie 750 frame without too much bother hope to hear from anyone soon cheers Ian Quote
dupersunc Posted September 25, 2022 Posted September 25, 2022 The linkage between the 2 bikes is quite different. There are a few ways to make it work, but require a bit of engineering. Quote
wraith Posted September 25, 2022 Posted September 25, 2022 Welcome to OSS, nice interdiction with jumping in with just a question 1 Quote
Scuzz300 Posted September 25, 2022 Author Posted September 25, 2022 Sorry mate new to this site. 2 Quote
Devilman Posted September 26, 2022 Posted September 26, 2022 (edited) 8 hours ago, wraith said: Welcome to OSS, nice interdiction with jumping in with just a question Honestly, I REALLY do not get this attitude that has been repeatedly displayed on this forum, from members and moderators alike. Unless someone is an absolutely dedicated oil-cooled nut looking purely to discuss anything and everything oil-cooled, the VAST majority of people coming here will be looking to get an answer to question, or information about a procedure / modification. So what the HELL is with everyone trying to act like an arrogant SOB, Gatekeeping the community and berating others for getting straight to the point? Who the HELL do people think they are, trying to be a sarcastic MOFO when someone has come here to ask for our HELP? This is the single most UGLY thing about the behavior of this Forum's members and it REALLY needs to stop. *Edit* Please note this is not specifically or only directed at you personally, it's an attitude I have seen across many different users of this forum Edited September 26, 2022 by Devilman Quote
wraith Posted September 26, 2022 Posted September 26, 2022 6 hours ago, Devilman said: Honestly, I REALLY do not get this attitude that has been repeatedly displayed on this forum, from members and moderators alike. Unless someone is an absolutely dedicated oil-cooled nut looking purely to discuss anything and everything oil-cooled, the VAST majority of people coming here will be looking to get an answer to question, or information about a procedure / modification. So what the HELL is with everyone trying to act like an arrogant SOB, Gatekeeping the community and berating others for getting straight to the point? Who the HELL do people think they are, trying to be a sarcastic MOFO when someone has come here to ask for our HELP? This is the single most UGLY thing about the behavior of this Forum's members and it REALLY needs to stop. *Edit* Please note this is not specifically or only directed at you personally, it's an attitude I have seen across many different users of this forum If you don't like it, don't come back There is always Google for answers It's not a case of stopping people just asking questions then never heard of again, it's just good manners. 7 Quote
davecara Posted September 26, 2022 Posted September 26, 2022 7 hours ago, Devilman said: Honestly, I REALLY do not get this attitude that has been repeatedly displayed on this forum, from members and moderators alike. Unless someone is an absolutely dedicated oil-cooled nut looking purely to discuss anything and everything oil-cooled, the VAST majority of people coming here will be looking to get an answer to question, or information about a procedure / modification. So what the HELL is with everyone trying to act like an arrogant SOB, Gatekeeping the community and berating others for getting straight to the point? Who the HELL do people think they are, trying to be a sarcastic MOFO when someone has come here to ask for our HELP? This is the single most UGLY thing about the behavior of this Forum's members and it REALLY needs to stop. *Edit* Please note this is not specifically or only directed at you personally, it's an attitude I have seen across many different users of this forum RTFR. This is an information sharing site that everyone is expected to contribute to not 'jump in, take information and leave'. Feel free to leave if you dont like it. Anyway off topic. @Scuzz300Swingarm will go in but you'll need custom top hats and you'll have to do some leg work on the linkage but it has been done. Theres a few slabbies in the projects section with different arms fitted. Good luck 3 Quote
denisd Posted September 26, 2022 Posted September 26, 2022 So what the HELL is with everyone trying to act like an arrogant SOB, Gatekeeping the community and berating others for getting straight to the point? I didn't try to act like an arrogant SOB (you said 'everyone') 2 Quote
Tony Nitrous Posted September 26, 2022 Posted September 26, 2022 If a stranger walks into my shed, says hi, introduces them self, takes an interest and has a chat, we’re on the same wavelength, I’m happy to help them. If a stranger walks into my shed and their first opening words are “How do I do this” my reaction will be somewhat different. I’ve been pulled into line on here a few times, going off topic, non relevant bikes etc. The site is what it is, being different to others is what makes if better than others. It’s rules and guidelines are here for a reason and work. 9 Quote
Blue Posted September 27, 2022 Posted September 27, 2022 I fitted a B12 swingarm into my 1st 85 750 slabby, can't remember exactly what I did but as said it was something to do with the linkage. So it is possible depends on your willingness & ability 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.