Scotty750 Posted December 7, 2015 Share Posted December 7, 2015 What sprocket carriers have less of an offset than the 1200 Bandit one? Have a 1200 rear in the GSX I am building. Ton of clearance between the chain and the tyre, but not enough to clear the frame, so I can afford to go in a hell of a lot. Heard that the Bandit ones have the biggest offsets on them, so wondering if anyone has a better option for me to try? Had a 500e one in the shed, but it does't fit the bandit drive. Quote Link to comment
Pedda Posted December 7, 2015 Share Posted December 7, 2015 7.5 or 11 cc Katana, which I know from own builds. So I guess any ET and similar models of that range will do as well. 1 Quote Link to comment
Ben Slabby Posted December 7, 2015 Share Posted December 7, 2015 Can't it be machined down? Quote Link to comment
berty Posted December 7, 2015 Share Posted December 7, 2015 750 or 1100 et for sure . Used the et carrier on my 7/11 - with bandit 12 rear wheel , to keep chain closer to tyre . Quote Link to comment
Cobby Posted December 7, 2015 Share Posted December 7, 2015 I'm also using a bandit wheel on a gsx and am just getting it machined down Quote Link to comment
Jocalopse Posted December 8, 2015 Share Posted December 8, 2015 (edited) I've got a bandit wheel in a bandit swing arm in a ET frame with a GSXR750 carrier and with a 530 chain I have a couple mm of tire clearance and lots of frame clearance. Edited December 8, 2015 by Jocalopse Quote Link to comment
Scotty750 Posted December 8, 2015 Author Share Posted December 8, 2015 Cheers guys. Just ordered an ET one. Quote Link to comment
wraith Posted December 8, 2015 Share Posted December 8, 2015 A bit late, but the GSX1100F (1127cc power screen) will do the job. 1 Quote Link to comment
FBJ Posted December 8, 2015 Share Posted December 8, 2015 Gsx1100efe is a little narrower. GS 500 twin is very narrow Quote Link to comment
gsx Posted December 9, 2015 Share Posted December 9, 2015 Eighties gs gsx will give you extra 4mm Quote Link to comment
Reelinfeele Posted December 10, 2015 Share Posted December 10, 2015 I have a bandit 1200 wheel with the stock ED carrier. I had to run a DID 530VX chain. I have about 2mm clearance. Quote Link to comment
Scotty750 Posted December 10, 2015 Author Share Posted December 10, 2015 Cheers guys. Hopefully new sprocket carrier will be here at the weekend so i can crack on. Cheers for the other options you've listed too. Quote Link to comment
mick-ne Posted February 1, 2016 Share Posted February 1, 2016 Hi , curious did this work ? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.