Sprocket carrier

[Scotty750]

What sprocket carriers have less of an offset than the 1200 Bandit one? Have a 1200 rear in the GSX I am building. Ton of clearance between the chain and the tyre, but not enough to clear the frame, so I can afford to go in a hell of a lot. Heard that the Bandit ones have the biggest offsets on them, so wondering if anyone has a better option for me to try? Had a 500e one in the shed, but it does't fit the bandit drive. 

[Pedda]

7.5 or 11 cc Katana, which I know from own builds. So I guess any ET and similar models of that range will do as well.

[Ben Slabby]

Can't it be machined down? 

[berty]

750 or 1100 et for sure . 

Used the et carrier on my 7/11 - with bandit 12 rear wheel , to keep chain closer to tyre . 

[Cobby]

I'm also using a bandit wheel on a gsx and am just getting it machined down 

[Jocalopse]

I've got a bandit wheel in a bandit swing arm in a ET frame with a GSXR750 carrier and with a 530 chain I have a couple mm of tire clearance and lots of frame clearance.

Edited December 8, 2015 by Jocalopse

[Scotty750]

Cheers guys. Just ordered an ET one. 

[wraith]

A bit late, but the GSX1100F (1127cc power screen) will do the job.

[FBJ]

Gsx1100efe is a little narrower. GS 500 twin is very narrow

[gsx]

Eighties gs gsx will give you extra 4mm

[Reelinfeele]

I have a bandit 1200 wheel with the stock ED carrier. I had to run a DID 530VX chain. I have about 2mm clearance. 

[Scotty750]

Cheers guys. Hopefully new sprocket carrier will be here at the weekend so i can crack on. Cheers for the other options you've listed too. 

[mick-ne]

Hi , curious did this work ?