Jump to content

Katana 1100 my old one, resto mod


busa ash

Recommended Posts

  • 2 weeks later...
  • 2 weeks later...
On 2/11/2022 at 7:28 AM, busa ash said:

Cheaper than uk and duty paid 12 days to my door . Depends on exchange rate but these cost £637 .00 

 

 

Yep sometimes its worth shopping around. I buy my TMR's from japan. alot cheaper than buying them here.

Bike is coming along great , i wanna see these colours bolted up. :banana:

  • Like 1
Link to comment
3 hours ago, Kamikaze said:

Yep sometimes its worth shopping around. I buy my TMR's from japan. alot cheaper than buying them here.

Bike is coming along great , i wanna see these colours bolted up. :banana:

How much? They are 1500 quid or so here, unless you have a Yosh sticker on the float bowls and paint the tops red, then they're 2500 quidO.o

Link to comment

Engine into frame is always a fun part of your day . Best method is engine on its side on a soft cloth chock engine on wood .  Remove engine cam cover breather . Then lower frame over the engine .fit front engine mount bolt and rear engine mounting bolt . Then with the help of a friend . Lift frame with engine upright . 

Then the build can start .

IMG_20220304_174214_661.jpg

  • Like 3
Link to comment

Now the engine was in a previous harris magnum build i stripped and sold .

The inlet rubbers were bought from suzuki and are supple and so the new mikuni rs 36s with a little grease on the inlets and the help of a good strong mate 

Popped in lovley 

Throttle and cables fitted at same time 

20220305_144042.jpg

20220305_144108.jpg

  • Like 4
Link to comment

Took a gamble , saw a new koso unit on a build at the manchestwr show . Koso rx2n  these show revs  to 10k revs . 

Idea was i wonder if i can get that to fit into a standard katana 1100 gauge pod ? 

So contacted digital speedos spoke to jon and ordered the unit

I will try to get a 3D printed in lay for the original gauge pod .

 

 

 

20220305_160714.jpg

20220305_160609.jpg

  • Like 8
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...