Tony Nitrous Posted July 5, 2021 Posted July 5, 2021 Haven’t had a good look or been through this one, only had it a few hours. Big day out, now crashed on the sofa. Needs a few little jobs doing, has a few nice bits. 11 Quote
dupersunc Posted July 5, 2021 Posted July 5, 2021 Cool looking bike Tony. Have I seen that on pbf? Quote
Tony Nitrous Posted July 5, 2021 Author Posted July 5, 2021 4 hours ago, dupersunc said: Cool looking bike Tony. Have I seen that on pbf? Yes. Jimjambandit did a thread when he bought it a couple of years back mostly as it is now. He added the flatslides, tidied up the clocks, did a few jobs on it and had it set up. It hasn’t been used in a while. 1 Quote
Tony Nitrous Posted July 5, 2021 Author Posted July 5, 2021 I will go over it when I get the chance, but from what I was told…. SRAD front end with Wilbers internals. SRAD rear wheel. 36 or 38mm flatslides. Several new wheel / steering etc bearings. Airtech tail. 85 - 750 tank and fairing. Only stuff I was told needed attention was the wiring under the seat / tail and the play in the suspension rocker arm. The price was close enough that I’m not going to stress if it needs anything else doing and I have another rolling engineless Slabbie and a complete Bandit 12 if I need to use them. I was actually looking for something quite different for something else I’m doing but this one came up and just appealed to me. 1 Quote
Joseph Posted July 5, 2021 Posted July 5, 2021 1 hour ago, Tony Nitrous said: I was actually looking for something quite different for something else I’m doing but this one came up and just appealed to me. We won't hold that against you Quote
Tony Nitrous Posted July 6, 2021 Author Posted July 6, 2021 (edited) 14 hours ago, Joseph said: We won't hold that against you Mods would if I posted it, I fell into that trap before! Started going through the spares, airbox, new air and oil filter, complete carbs, carbs in bits, new front sprocket, new coil, spare clocks and surround, fairing support etc. I’m a bit of a hoarder so everything will get squirrelled away. The guy chucked in a paddock stand too. Edited July 6, 2021 by Tony Nitrous 3 Quote
oddsocks Posted July 6, 2021 Posted July 6, 2021 Nice score with that lot. Couple of original air boxes too I see. Good to keep them just in case. Quote
Tony Nitrous Posted July 7, 2021 Author Posted July 7, 2021 Thanks for the comments and feedback. The spares will come in handy as I’ve dragged the other engineless G out of storage too. There’s also a Mk-1 Blandit 12 that may donate it’s motor if the back and front ends go to my ET build. Im about 4 months away from being able to get stuck into everything again, Certainly looking forward to being on some Old Skool cool. 4 Quote
Tony Nitrous Posted July 7, 2021 Author Posted July 7, 2021 The previous owner who did the mods to it saw a post of mine and replied so I got a bit more info. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.