R1guy Posted May 7, 2022 Posted May 7, 2022 6 minutes ago, fatblokeonbandit said: That’s plan “D” as I haven’t got a bit of ally plate big enough Or could a friendly welder glue an “ear” onto the old one to allow the foot peg to be relocated to where you want it? Quote
fatblokeonbandit Posted May 7, 2022 Author Posted May 7, 2022 No time, shipmate, got to sort carbs yet, so pegs are ok ish for now… Quote
fatblokeonbandit Posted May 8, 2022 Author Posted May 8, 2022 So it was all getting far to complicated!!!! keep it simple stupid Much better,,,plastic templates made now off to the skip at work for some 10 mm ally plate 2 Quote
fatblokeonbandit Posted May 9, 2022 Author Posted May 9, 2022 I might file the pointy sharp corners off, just been to the roundabout at the end of the road and the position felt mucho better might make a heel guard for the port side to keep clear of the chain.. that should be it for Anglesey now.. 1 Quote
fatblokeonbandit Posted May 19, 2022 Author Posted May 19, 2022 Found an old Firebucket heel guard now if I could find 2 screws the same 3 Quote
fatblokeonbandit Posted May 19, 2022 Author Posted May 19, 2022 Not sure about the can bracket…???? 2 Quote
denisd Posted May 19, 2022 Posted May 19, 2022 26 minutes ago, fatblokeonbandit said: Not sure about the can bracket…???? See what you mean Quote
fatblokeonbandit Posted May 19, 2022 Author Posted May 19, 2022 (edited) Its shite but works, I have a plan but if it don’t work this will have to stay for Angelsey Edited May 19, 2022 by fatblokeonbandit 2 Quote
fatblokeonbandit Posted May 20, 2022 Author Posted May 20, 2022 Mmm better but I need more ally bar and Ends 4 Quote
fatblokeonbandit Posted May 23, 2022 Author Posted May 23, 2022 (edited) Not perfect but much better I think Edited May 23, 2022 by fatblokeonbandit 7 Quote
fatblokeonbandit Posted May 26, 2022 Author Posted May 26, 2022 Last test before loading van to go to Anglesey, finally got the cards tweaked so it runs half decent 5 Quote
fatblokeonbandit Posted May 26, 2022 Author Posted May 26, 2022 I was in the process............... 4 Quote
fatblokeonbandit Posted May 30, 2022 Author Posted May 30, 2022 Fun fun fun,,,what a HOOT some beautiful bikes sun shone and had a good roar round in circles excellent Brian did 9 miles before the port side foot peg came loose and turned upside down soon fixed but apart from that it went well onboard video to follow 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.