600 carbs.

[leldolini69]

Hi peeps. Could I get 33mm carbs to work with 1127 ? Jetting filters etc. TIA

[TonyGee]

yeah they will fit with the right rubbers, you will be down on power though compared to using say 36mm or 38mm carbs. the 1200 inazuma and 1200 ss use 32mm carbs and they claim around 100 bhp !!!!  but lack top end. but be aware i tried a set of 32mm bandit carbs on a 1200 and they fit no problem but the middle balance adjuster fowls on the outside of the cam chain tunnel and the throttle wont open fully.  

[Losiu]

Use inazuma 1200 rubbers

[TonyGee]

4 minutes ago, Losiu said:

Use inazuma 1200 rubbers

their really hard to find, or buy new !!!!  

[Losiu]

 

Edited November 24, 2020 by Losiu
pics

[Losiu]

3 minutes ago, TonyGee said:

their really hard to find, or buy new !!!!  

 

I know. 
I bought the only used ones available in my country: P

[TonyGee]

4 minutes ago, Losiu said:

 

I know. 
I bought the only used ones available in my country: P

you've just cleared up something that has been bugging me for a while,  i had an idea that the 1200 zuma rubbers where longer but couldn't find anybody who had some to measure. now i know, cheers for that Losiu 

[Losiu]

29 minutes ago, TonyGee said:

you've just cleared up something that has been bugging me for a while,  i had an idea that the 1200 zuma rubbers where longer but couldn't find anybody who had some to measure. now i know, cheers for that Losiu 

That's what this place is for :)

Edited November 24, 2020 by Losiu

[bluedog59]

Two points.

Are we talking 33mm CV carbs or  33mm slide carbs ( possibly VM29ss bored to 33mm) ?

Would it be possible you could make some aluminium spacer plates to go between the head and rubbers to move the carbs back ?

[TonyGee]

6 minutes ago, bluedog59 said:

Two points.

Are we talking 33mm CV carbs or  33mm slide carbs ( possibly VM29ss bored to 33mm) ?

Would it be possible you could make some aluminium spacer plates to go between the head and rubbers to move the carbs back ?

i was talking 32mm bandit CV carbs,  yeah that was another thought about 5mm spacers between the head and rubbers. their are some bikes that have them.  

[TonyGee]

looks like the gsx1200 rubbers are still available from Suzuki but £31.39 each !!!!!!   

[Dezza]

I still do not understand why you want to fit 32mm carbs. B12 mk1 carbs and rubbers aren't that difficult to source.

[TonyGee]

9 minutes ago, Dezza said:

I still do not understand why you want to fit 32mm carbs. B12 mk1 carbs and rubbers aren't that difficult to source.

explained in other thread

[Captain Chaos]

Draw through turbo is the answer. 

[TonyGee]

1 hour ago, Captain Chaos said:

Draw through turbo is the answer. 

ha ha yeah then it'll go 

[Hoomietune]

SS12 rubbers 40 mm depth 

SS 12-  32 mm Kehlins  

rare as hens teeth ....

lucky timed shot these will be coming off today / staying off  ,