wraith Posted October 7, 2020 Posted October 7, 2020 I know this has came up before, but I can't find it. After market oil coolers, full width (330mm) I've always used a 19 row (an8) but seen post where people have/are using 16 row. So for street use is a 16 row good or should I stick with a 19 row? Sorry if this boring for some of you Quote
Gixer1460 Posted October 7, 2020 Posted October 7, 2020 No one has ever 'over' cooled an oil cooled motor and cooler oil is always better! 3 Quote
Jaydee Posted October 7, 2020 Posted October 7, 2020 48 minutes ago, wraith said: So for street use is a 16 row good or should I stick with a 19 row? An extra wide 16 row cooler probably has the same or close to cooling surface area as a 19 row standard width cooler. 1 Quote
Dezza Posted October 7, 2020 Posted October 7, 2020 It is mandatory to have as big an aftermarket oil cooler as is possible on an OSS bike, or even 2 coolers on oilcooled machines, allegedly 3 Quote
clivegto Posted October 8, 2020 Posted October 8, 2020 I know people who have run smaller coolers without any problems. But I always try for more cooling. 2 Quote
Joseph Posted October 8, 2020 Posted October 8, 2020 Well look at the size of a B12 cooler compared to a GSXR, it's way smaller (i suppose due to absence of fairings ?) Quote
Gixer1460 Posted October 8, 2020 Posted October 8, 2020 6 minutes ago, Joseph said: Well look at the size of a B12 cooler compared to a GSXR, it's way smaller (i suppose due to absence of fairings ?) And compare the power outputs and you'll probably see why one is smaller than the other! 1 Quote
wraith Posted October 8, 2020 Author Posted October 8, 2020 Ordered a 19 row 330x50 an8 cooler 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.