rdubandit Posted August 6, 2020 Posted August 6, 2020 I have a slingshot faring in headlights on my Bandit. I wanted to check with a slingshot owner on the operation of the dual headlights. Mine currently has low beam on the left headlight high beam on the right headlight and the low beam is insufficient for nighttime riding. Quote
Captain Chaos Posted August 7, 2020 Posted August 7, 2020 It depends on where the bike was sold new. My 750L is an European version (sold new in the Netherlands), low beam and high beam work on both headlights. If yours has H4 light bulbs it is easy to connect both lamps together. But it would be better to use a relay if not already there (J and K have it from the factory). Quote
banoffee Posted August 7, 2020 Posted August 7, 2020 My JDM 750L had both lights dip and main too. Quote
rdubandit Posted August 7, 2020 Author Posted August 7, 2020 Thanks, gents! I have both lights on the same circuit, so it’s time for some sleuthing with a voltmeter. Quote
Damienga15de Posted August 30, 2020 Posted August 30, 2020 My 750 M had a h4 high and low in the left headlight and a h7? with an adaptor in the right headlight Quote
Magoo Posted August 31, 2020 Posted August 31, 2020 My 1100L has dipped and main (and side) on both lamps. Quote
Gixer1460 Posted August 31, 2020 Posted August 31, 2020 12 hours ago, Damienga15de said: My 750 M had a h4 high and low in the left headlight and a h7? with an adaptor in the right headlight Fairly sure that's an adaptation as both lights should be H4 Low and High beam capable. Quote
Captn Posted September 2, 2020 Posted September 2, 2020 Mine has both high and low beam on both bulbs. US spec. The hi/lo bar switch is used to power a relay coil to switch the voltage to each filament due to the amperage draw of the filaments do as no to burn up the hi/lo switch. If you are using LEDs the amperage is considerably less. I've got some excellent SIS wire (tin plated copper, high jacket temp rated) that is perfect for wiring bikes if you need some, free of course. Im just down the road from you. Text me if interested. Quote
jonny1bump Posted September 3, 2020 Posted September 3, 2020 The stock m headlight has parking bulb and high and low bulbs in both headlights. They also had no relays. Now the slabsides did have relays. The bike im wiring up now will have relays. 1 Quote
Captain Chaos Posted September 4, 2020 Posted September 4, 2020 8 hours ago, jonny1bump said: The stock m headlight has parking bulb and high and low bulbs in both headlights. Didn't the M have a separate position light above the headlight unit? I seem to remember something like that 1 Quote
stellafella Posted September 4, 2020 Posted September 4, 2020 (edited) Correct for my 'M' slingshot. Small separate light above the main lights and both high and low beam work together via relays Edited September 4, 2020 by stellafella Pic added Quote
jonny1bump Posted September 4, 2020 Posted September 4, 2020 Oh yes forgot about that I had smoothed it over and but them in bowls. Hmmmm got thinking now, may go back to stock style on this build. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.