Moriwaki1105 Posted December 18, 2018 Share Posted December 18, 2018 My mate was wanting to put a Six inch rear wheel into his standard 1100L arm .....is it possible lads ?....SRAD wheel ?....Busa maybe ? Thanks again . Quote Link to comment
dupersunc Posted December 18, 2018 Share Posted December 18, 2018 1 minute ago, Moriwaki1105 said: My mate was wanting to put a Six inch rear wheel into his standard 1100L arm .....is it possible lads ?....SRAD wheel ?....Busa maybe ? Thanks again . Srad wheel will work. chain line is the tricky bit. You need need to machine around 10mm of the sprocket carrier. Quote Link to comment
Moriwaki1105 Posted December 18, 2018 Author Share Posted December 18, 2018 Thanks Duprsunc . Quote Link to comment
Evoluzione Posted December 21, 2018 Share Posted December 21, 2018 Not sure about about an 1100L arm ... but I've got a 6 1/2 inch PVM rear wheel on a 750 WN Swinger attached to my 1100M,Just fits !! Quote Link to comment
nopokewithoutsmoke Posted December 22, 2018 Share Posted December 22, 2018 On 12/18/2018 at 8:48 PM, Moriwaki1105 said: My mate was wanting to put a Six inch rear wheel into his standard 1100L arm .....is it possible lads ?....SRAD wheel ?....Busa maybe ? Thanks again . Doesn't really answer your question, but I'm fairly sure that Srad 750 and 1st gen Busa 6" wheels are exactly the same. Quote Link to comment
Sandman Posted December 22, 2018 Share Posted December 22, 2018 Why using a 6 inch rim? Quote Link to comment
Duckndive Posted December 23, 2018 Share Posted December 23, 2018 (edited) On 12/18/2018 at 8:48 PM, Moriwaki1105 said: My mate was wanting to put a Six inch rear wheel into his standard 1100L arm .....is it possible lads ?....SRAD wheel ?....Busa maybe ? Thanks again . Ask Jonny1bump he,s done it with SRAD wheel Edited December 23, 2018 by Duckndive Quote Link to comment
jonny1bump Posted December 28, 2018 Share Posted December 28, 2018 In my build thread there some pics of k6 or 7 fit which is pretty identical. First task is machine cush drive as much as possible, to get wheel and chain run over and make spacers to suit. The srad lot easier to fit as even thou they all 6 inch the srad has smaller lip make outer part of rim a little less wide. Main thing is run straight edges to front wheel and check and check. It's all bit of compromise may have to space gearbox sprocket couple of mm to. Some have compromised further by using 520 chain personally I really do not think that's good idea when running more power let alone standard. The srad probably best 6 inch to use for a good fit and correct wheel alignment but not as light as later k. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.