Logbooks

THE LOG BOOK:

I have 2 Log Books, the first one is for the engine and the second one is for the bike.

ENGINE LOG BOOK:
Contained in this Log is every measurement or weight of components that are subjected to wear, this includes the transmission, clutch plates, clutch springs, crankshaft, connecting rods, pistons, piston pins, piston rings, camshafts, valve guides, valve stems and valve springs, drive chain and sprockets . Although you may consider this time consuming the benefits are substantial. Once you have a baseline of your measurements then the next time you disassemble your engine you will have a very good picture of the wear rate of all the components. This process will virtually eliminate parts breaking from fatigue and you will be able to determine what aftermarket parts are more durable. For example I know using a certain type of piston ring in my 1327cc EFE race engine that for every 165 passes down the race track that both my top and second ring end gap wears 0.001″ of any inch. This was the same wear rate that I encountered with my 1230cc EFE race engine using the same type of piston rings. So I know that the oil that I am using is working and the quality of the part is consistant no matter what the power out put is and that after x ammount of passes I have to replace the rings before the power starts to drop. Utilizing this measurement process for the last 20 years I have found that the one part of the GS /EFE engine’s that wear out the fastest are the valve springs, and by the way I have never broken a valve spring in over 7,100 passes down the track.

RACE BIKE LOG BOOK:
In this log I list my tune-up ( jets, timming, drive sprocket size, tire psi,), in additon to the brand of race fuel and octane, my launch and shift RPM for the particular track that I am racing at. Also before I unload my bike, I list measurement of the temperture, humidity, wind direction including approximate speed, and air density and record the time of day. I remeasure and list all of the above items every hour that I am at the track. The info gained from these measurements is very beneficial when you are racing a dial-in type of class, because it makes the tune decission for every round easier. Also once you collect all of the above info you will have an insight on your bikes performance the next time you race at the same track if the weather and time of day is very close.

Tagged , , , , , . Bookmark the permalink.