At the end of January I got a chance to go and visit a man who has probably forgotten more about building and tuning 90s GSXRs than most of us will ever know. His name is Don Hill and he owns Rooster Racing.
What made this opportunity to visit Don’s workshops special was that it’s not something he offers very often. He is almost adverse to attention and publicity, preferring to hand pick the people he builds bikes for. The reason for Don’s approach became clearer as the day wore on.
Don Hill
I first became aware of Don’s work when my friend Adrian McCarthy (AKA Mole) told me he was going to be one of 3 riders racing Don’s Rooster Racing GSXR powered Harris at the 2018 endurance legends event at Donington. When I was there, I got a quick look round the bike in the pit garage. The build quality and the finish were something very special.
That same year I started my own race career ( if you can call it that). Racing at Eastfortune on my home built GSXR1100 Slabside. I quickly learned that 3 of the fastest GSXRs in my post classic senior class were all built by Don at Rooster Racing. I would like to say that’s why they were so much faster than me but the truth was that was entirely down to me. With Don’s Slabside based 1216 engines routinely and reliably knocking out over 160 bhp, I can’t see my home built Slabby getting close even if my riding skills improve.
I got chatting to Don in the pits at Eastfortune last year between my races. I had been suffering from some fuelling problems and Mole and I and the rest of the team had been struggling to solve the problem. Don turned up and took around 2 minutes to sort it. We chatted again after my last race and he agreed that I could come down and learn more about what he was doing and write something for OSS.
Rooster Racing
There were two main reasons I was intrigued to know more about Don’s work. Firstly, I was impressed by the performance and the reliability of the engines he was building. Secondly, Don’s talents don’t stop at engine building and tuning. He fabricates the frame and swingarm modifications, builds his own exhausts systems and as if that wasn’t enough, he produces the most amazing paint work too. There aren’t may people who can single-handedly build a race bike to such a high standard. I just needed to know more.
Mole was going down to Don’s to pick up freshly painted body work and wheels for his 2019 wet bike. So I hitched a lift down to meet Don on his his home turf and learn more about the work that he does.
When we arrived Don took us into his main hanger size workshop, he put the heating on and then presented us with us with tea and bacon butties. I liked him already.
While Mole and Don talked I had a wander round looking at some of the motorcycle exotica that peppered the workshop.
GSXR Engine tuning
Don was in the midst of building a new Machine shop for his gas flow bench. The flow bench was situated in another location until Don has completed the extension. Don promised me a return visit when all of the work was complete so that we could do a more detailed feature on it.
,We talked about his fastidious approach to head work. He will routinely spend 200 man hours on a head between porting it and gas flowing it. When we talked about costs, I quickly worked out that he probably ends up earning about £3 an hour on a head. It was at this point that I started to realise Don was an out and out perfectionist. He was not motivated by cost or profit. His motivation was quality. This was not Don’s day job either.
Don explained his method of gas flowing a cylinder head. Don would always gas flow with the carbs on. Not any old carbs but the actual carbs that were going to be used on the bike. He acknowledged that everyone had their own approach but this was his. Engines were built to each racers specific requirements. Those requirements often came down to where the bike would be raced and how and where the rider wanted the power to develop. No one engine would be the same.
GSXR frame fabricaion
Don had a GSXR slabside that he was mid way through building for a racer from the ground up. This included all of the frame and swingarm mods and a very trick aluminium breather tank.
GSXR exhaust fabrication
Don then talked us through the exhaust systems that he builds to go with his engines. He talked about about the importance of narrowing the headers at the manifold and ensuring that the pulses from the matched cylinders worked in unison at the collector box. I was out of my depth but I nodded like I understood.
Rooster Racing paint
Mole’s freshly painted body work and wheels were laid out for collection and they were perfect. Don was clearly a man of artistic talents too as he explained his love for ornamental wood carving and shared some pictures of his work. Looking closely at the paint work than Don had completed for Mole, it bore all of the hallmarks of a perfectionist, just like everything else that Don put his hands to.
Quality and integrity are inseparable
As the morning wore on and Don and I talked some more I realised what a rare individual he was. When I say this, I mean Don seemed to be able to bring the the same methodical, well rehearsed quality, to everything he did. There was also something unique about the way Don viewed the bikes and the riders that he worked with.
When he built a bike for someone he maintained an genuine ownership like concern for the bike and the rider’s fortunes. This was the reason Don chose those who he built for so carefully. He had to be sure that they the rider would be prepared to do things Don’s way. He doesn’t build parts of bikes, he builds a complete performance package. The performance came from each part of the bike working in unison.
Mole was a trained motor mechanic and was no stranger to building his own machines. He had won a number of championships on his own builds but since meeting Don he now deferred to Don on all major decisions on race bike performance. As Mole put it “when Don tells you to do something you don’t argue you just do it”
I left Don’s workshop with a deep respect for his skills and his ethos. Don understood the high stakes for a racer, having raced for many years himself when he was younger. Racers had partners and families to provide for. The performance, reliability and ultimately the safety of the machines Don built meant more than just winning. Lives were at stake and that responsibility was something that weighed heavily on Don’s conscience.
I concluded that Don was a man of great skill, who would always put quality first. He would never be afraid to walk away if he felt that his approach was unwelcome, unappreciated or compromised. His commitment to that approach and his integrity left me feeling that I could implicitly and completely trust Don. I can’t think of a more important time to trust someone than when they’re building you a race bike.
Oldskoolsuzuki will return to Rooster Racing later in the year. In the meantime, don’t call Don, he’ll call you.
Members Discuss this article here
You must be logged in to post a comment.