madbeezer Posted October 8, 2017 Share Posted October 8, 2017 First of all ,,,, hi peeps i am new to this forum ,, the question i have is that i have a gs 850 bobber 1884 with a set of barrels / top end or a complete engine ,,,, fitted of an 1100g i bought the bike in bits ,, few years ago got it running great but the clutch is away ,,, i bought clutch plaits for an 1100 but after removing the knackered one the new plaits look bigger ??? so they will need sent back ,,,, so Help is required ... does any guru out there now the difference between a 850 clutch and an 1100 ,,, apart from the obvious ,,, the 1100 looks beefier ,,,, look forward to hearing back cheeeers peeps Quote Link to comment
Cheeky4648 Posted October 8, 2017 Share Posted October 8, 2017 Welcome to OSS the 850 and gs1000 used the same basket which took 1 less plate but the plates were bigger in diameter. The 1100g uses the same plates as the 1000, 1100 and 1150, 16 valve engines. Hope this helps. Quote Link to comment
Fazz711 Posted October 8, 2017 Share Posted October 8, 2017 Hi bud. Welcome to OSS Quote Link to comment
kiwi Posted October 8, 2017 Share Posted October 8, 2017 If you have an 850 bottom end you need gs850 or gsx750 plates, 1000cc different width plates hope that helps. Quote Link to comment
Swiss Toni Posted October 9, 2017 Share Posted October 9, 2017 Hello matey. Welcome ! Quote Link to comment
Gixer1460 Posted October 9, 2017 Share Posted October 9, 2017 17 hours ago, Cheeky4648 said: the 850 and gs1000 used the same basket ......... but the plates were bigger in diameter. Eh ! ! ! - can't have it both ways - either the same OR bigger! Quote Link to comment
Cheeky4648 Posted October 9, 2017 Share Posted October 9, 2017 15 minutes ago, Gixer1460 said: Eh ! ! ! - can't have it both ways - either the same OR bigger! Bigger diameter than the 16v plates Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.