crainer Posted July 20, 2015 Share Posted July 20, 2015 Hi. Putting a b12 motor in my 750 slabby frame. Just wondering if I can use the pick up out off the 750 motor and use in the 1200 so I can still use the cdi unit?? Tia Quote Link to comment
Ben Slabby Posted July 20, 2015 Share Posted July 20, 2015 What are you using, the 750 cdi? Quote Link to comment
vizman Posted July 20, 2015 Share Posted July 20, 2015 I think the 750 rev limiter is a lot higher than the b12 one, miss a gear and it might go into shitsville 1 Quote Link to comment
Ben Slabby Posted July 20, 2015 Share Posted July 20, 2015 Yeah. Its do-able, but as Viz said, miss a gear and it could get messy. Quote Link to comment
crainer Posted July 20, 2015 Author Share Posted July 20, 2015 Ah okay. Could a 1200 cdi be adapted to the 750 loom?? Quote Link to comment
vizman Posted July 20, 2015 Share Posted July 20, 2015 yup, but you'll need the b12ignition or a resistor for the 12cdi to work. Quote Link to comment
Ben Slabby Posted July 21, 2015 Share Posted July 21, 2015 Got a wiring diagram somewhere, I'll fish it out when I get home. 1 Quote Link to comment
Captain Chaos Posted July 21, 2015 Share Posted July 21, 2015 slabby has two pick-ups (at the crankshaft), B12 has one. Only a slabby CDI will work with the slabby pick-ups/loom. Quote Link to comment
vizman Posted July 21, 2015 Share Posted July 21, 2015 use the b12 pick-ups/cdi/ignition Quote Link to comment
crainer Posted July 21, 2015 Author Share Posted July 21, 2015 Oh dear. Think I will get the b12 cdi/pick ups. Cheers Quote Link to comment
fatblokeonbandit Posted July 21, 2015 Share Posted July 21, 2015 Its soo much easier to fit an entire bandit loom switches and all the bits , so that everything just plugs in, if you start cutting and rewiring the cdi wiring it will probably introduce faults where you don't need them, when I did my Harris I got late model (Mark 2) bandit loom cdi ignition handlebar switches alternator and pickups, and leccy clocks as well, depends if you want the slabby clocks I suppose... It all plugs together and just works. Quote Link to comment
kokolis Posted July 21, 2015 Share Posted July 21, 2015 use the b12 pick-ups/cdi/ignitionyou have to change the sockets aswell Quote Link to comment
kokolis Posted July 21, 2015 Share Posted July 21, 2015 Its soo much easier to fit an entire bandit loom switches and all the bits , so that everything just plugs in, if you start cutting and rewiring the cdi wiring it will probably introduce faults where you don't need them, when I did my Harris I got late model (Mark 2) bandit loom cdi ignition handlebar switches alternator and pickups, and leccy clocks as well, depends if you want the slabby clocks I suppose... It all plugs together and just works.It would be a lot easier to just use a slabby 11 cdi. Quote Link to comment
fatblokeonbandit Posted July 21, 2015 Share Posted July 21, 2015 Have you seen the price of anythibg slabby!! And it will be at least 25 years old, i bought all the bandit stuff for just over a ton and its mostly 8 years old Quote Link to comment
crainer Posted July 21, 2015 Author Share Posted July 21, 2015 Kokolis what do you mean by sockets??? Quote Link to comment
vizman Posted July 21, 2015 Share Posted July 21, 2015 the electrical plugs/connectors....easy job. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.