spiderpig Posted October 24 Posted October 24 Anyone have any info? Plan for next fighter. I know it's too wide for the 11L frame but more concerned with linkage arrangement. Quote
Upshotknothole Posted October 25 Posted October 25 Pain in the ass to find a photo of a naked 08 R1, the linkage doesn't look to be too crazy, how much wider is it than the frame? Quote
clivegto Posted October 25 Posted October 25 I put an earl R1 arm in a 750 slabby which was a lot of work. Quote
spiderpig Posted October 25 Author Posted October 25 It's verrrry wide, iirc when I narrow it enough to fit the frame there isn't enough bearing cup left for a bearing. So need to narrow it, bore it out and fit new cups. The linkage is similar set up to early r1 but offset for the underseat linkpipe, just to make life harder. All the slingshot mounts will have to be cut off and start from scratch. Quote
Joseph Posted October 25 Posted October 25 5 hours ago, Upshotknothole said: Pain in the ass to find a photo of a naked 08 R1, the linkage doesn't look to be too crazy, how much wider is it than the frame? Pivot width is over 260mm on the later R1 where it's only 230 odd on OSS Quote
wraith Posted October 25 Posted October 25 Got a similar linkage set up on a jmc swingarm, and it's a real pain to set up right, so much so I'm going to take out the jmc and put a more standard gsxr arm in with normal linkage Quote
clivegto Posted October 26 Posted October 26 On 10/25/2024 at 10:05 AM, spiderpig said: It's verrrry wide, iirc when I narrow it enough to fit the frame there isn't enough bearing cup left for a bearing. So need to narrow it, bore it out and fit new cups. Yes that what I had to do to the earlier one 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.