Grove Posted June 4 Share Posted June 4 I’ve got a Martek pikes peak that I brought off mark and I’m currently building. His craftsmanship is absolutely spot on, unfortunately some of his wait times for parts can be a bit long but if you want the quality sometimes you have to wait. Quote Link to comment
Dezza Posted June 4 Share Posted June 4 (edited) Can't see the pics, unless it's all been painted black and photos taken flash-free down a coal mine . Edited June 4 by Dezza 5 Quote Link to comment
PanzerWomble Posted June 4 Share Posted June 4 1 hour ago, Dezza said: Can't see the pics, unless it's all been painted black and photos taken flash-free down a coal mine . Ah .....but did he actually get it as this seems to be the main complaint ? These are placeholder pix . Quote Link to comment
Grove Posted June 4 Share Posted June 4 I don’t know why my photos won’t upload there is photos of it on here that I’ve posted before Quote Link to comment
TLRS Posted June 7 Share Posted June 7 Few people wonder why guys like sweary bob became sweary. Or why there are so few people doing big tube ally frames. Let alone ones that look right. Often it's small numbers too which is becoming increasingly rare these days innit. People who really want a big tube ally frame in their life.. but don't feel like talking to MK.. try Nico Bakker. Quote Link to comment
Grove Posted June 8 Share Posted June 8 Finally managed to work out how to minimise the size of the photos. Here’s how my Martek was a couple of weeks ago before the new levers and lines 2 Quote Link to comment
Grove Posted June 21 Share Posted June 21 On 6/4/2024 at 12:48 PM, PanzerWomble said: Ah .....but did he actually get it as this seems to be the main complaint ? These are placeholder pix . Yes I’ve got the bike mate. It in my workshop at home. I’ve managed to add a photo now, had to minimise the picture size. Quote Link to comment
BoostedRooster712 Posted June 21 Share Posted June 21 (edited) Not much room for headers there. My oilcooler is mounted up as high as it can go. About the same size as yours too. Edited June 21 by BoostedRooster712 Spelling Quote Link to comment
Gixer1460 Posted June 21 Share Posted June 21 2 hours ago, BoostedRooster712 said: Not much room for headers there. My oilcooler is mounted up as high as it can go. About the same size as yours too. If the cooler was turned upside down using straight hose connections and the mounts revised - you'd gain a ton of space and still not conflict with the bottom yoke. It does seem to be hanging low! Quote Link to comment
Grove Posted June 21 Share Posted June 21 2 hours ago, BoostedRooster712 said: Not much room for headers there. My oilcooler is mounted up as high as it can go. About the same size as yours too. How’s it going buddy? It’s only stuck there out of the way till I get the headers then I’ll have a play with it 1 Quote Link to comment
Grove Posted June 21 Share Posted June 21 4 minutes ago, Gixer1460 said: If the cooler was turned upside down using straight hose connections and the mounts revised - you'd gain a ton of space and still not conflict with the bottom yoke. It does seem to be hanging low! Will look at that cheers buddy. I just stuck it on out of the way so it didn’t get damaged. When I’ve got the headers I’ll have a play and reposition it Quote Link to comment
Grove Posted June 21 Share Posted June 21 cheers for the comments. Oil cooler relocated. More photos in my post 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.