BoostedRooster712 Posted July 13, 2023 Share Posted July 13, 2023 G'Day, I'm looking at a set of TMR MJN 39mm carbs with a side pull configuration. They're stated as being off an 1100 with the correct spacing. As they are going on a 7/12 I'd like to convert them to centre pull. Do any of you know if this is a relatively easy job or is it difficult? I'm not finding a lot of information out therre for them. Quote Link to comment
Dezza Posted July 13, 2023 Share Posted July 13, 2023 Maybe email Allens carbs in Bingham. They are usually pretty helpful and helped me move my throttle bracket from the centre to between carbs 3 and 4 (RS38), no new parts needed. To move the throttle bracket to one side of the bank on RSs requires some different parts (one is the throttle rod thingy i think), which are listed in the RS manual. Perhaps the equivalent parts are available for TMRs. 1 Quote Link to comment
Duckndive Posted July 13, 2023 Share Posted July 13, 2023 2 hours ago, BoostedRooster712 said: G'Day, I'm looking at a set of TMR MJN 39mm carbs with a side pull configuration. They're stated as being off an 1100 with the correct spacing. As they are going on a 7/12 I'd like to convert them to centre pull. Do any of you know if this is a relatively easy job or is it difficult? I'm not finding a lot of information out therre for them. Try https://www.allensperformance.co.uk/carb-kit/ 1 Quote Link to comment
BoostedRooster712 Posted July 13, 2023 Author Share Posted July 13, 2023 Thank you gents. Quote Link to comment
george 1100 Posted July 14, 2023 Share Posted July 14, 2023 Any reason you are going centre pull? Looks? Quote Link to comment
BoostedRooster712 Posted July 14, 2023 Author Share Posted July 14, 2023 Just now, george 1100 said: Any reason you are going centre pull? Looks? Clearance from frame and fuel tap were my main concerns. Quote Link to comment
george 1100 Posted July 14, 2023 Share Posted July 14, 2023 I contemplated converting mine to side pull just for ease but not sure if it will fit. At the moment the centre pull cables interfere with the oil take off bar at the rear of the valve cover 1 Quote Link to comment
Joseph Posted July 14, 2023 Share Posted July 14, 2023 (edited) 16 minutes ago, george 1100 said: I contemplated converting mine to side pull just for ease but not sure if it will fit. At the moment the centre pull cables interfere with the oil take off bar at the rear of the valve cover Got a pic ? Edit : found a pic Edited July 14, 2023 by Joseph Build topic search Quote Link to comment
BoostedRooster712 Posted July 18, 2023 Author Share Posted July 18, 2023 I stopped bidding on those carbs when they got to half the price of a new set. I think I'll get some FCRs instead. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.