Convert Yoshimura TMR MJN from side pull to centre.

[BoostedRooster712]

G'Day,

I'm looking at a set of TMR MJN 39mm carbs with a side pull configuration. They're stated as being off an 1100 with the correct spacing.

As they are going on a 7/12 I'd like to convert them to centre pull.

Do any of you know if this is a relatively easy job or is it difficult?

I'm not finding a lot of information out therre for them.

[Dezza]

Maybe email Allens carbs in Bingham. They are usually pretty helpful and helped me move my throttle bracket from the centre to between carbs 3 and 4 (RS38), no new parts needed. To move the throttle bracket to one side of the bank on RSs requires some different parts (one is the throttle rod thingy i think), which are listed in the RS manual. Perhaps the equivalent parts are available for TMRs.

[Duckndive]

2 hours ago, BoostedRooster712 said:

G'Day,

I'm looking at a set of TMR MJN 39mm carbs with a side pull configuration. They're stated as being off an 1100 with the correct spacing.

As they are going on a 7/12 I'd like to convert them to centre pull.

Do any of you know if this is a relatively easy job or is it difficult?

I'm not finding a lot of information out therre for them.

Try 

https://www.allensperformance.co.uk/carb-kit/

[BoostedRooster712]

Thank you gents. 

[george 1100]

Any reason you are going centre pull? Looks? 

 

[BoostedRooster712]

Just now, george 1100 said:

Any reason you are going centre pull? Looks? 

 

Clearance from frame and fuel tap were my main concerns. 

[george 1100]

I contemplated converting mine to side pull just for ease but not sure if it will fit. At the moment the centre pull cables interfere with the oil take off bar at the rear of the valve cover

[Joseph]

16 minutes ago, george 1100 said:

I contemplated converting mine to side pull just for ease but not sure if it will fit. At the moment the centre pull cables interfere with the oil take off bar at the rear of the valve cover

Got a pic ?

Edit : found a pic

Edited July 14, 2023 by Joseph
Build topic search

[BoostedRooster712]

I stopped bidding on those carbs when they got to half the price of a new set.

I think I'll get some FCRs instead.