gsxwill Posted June 19, 2023 Posted June 19, 2023 So picked up this in the week, don't think it's seen the light of day for 10+years Got big Ali rear sprocket and did have a dope hope sticker on one of the side panels 3 Quote
Dezza Posted June 19, 2023 Posted June 19, 2023 Looks like an ace project bike. If you change your mind on it can I have 1st dibs? 2 Quote
R1guy Posted June 19, 2023 Posted June 19, 2023 14 hours ago, gsxwill said: Big headlight and draw-thru system and be done with it … 1 Quote
eddiegsx Posted June 19, 2023 Posted June 19, 2023 45 minutes ago, R1guy said: Big headlight and draw-thru system and be done with it … Don't forget proper clocks. Quote
R1guy Posted June 19, 2023 Posted June 19, 2023 29 minutes ago, eddiegsx said: Don't forget proper clocks. Nope. Big Rev counter and a boost gauge . Quote
eddiegsx Posted June 19, 2023 Posted June 19, 2023 2 minutes ago, R1guy said: Nope. Big Rev counter and a boost gauge . As long as it's in proportion with that fuck off huge headlight it'll work. Quote
gsxwill Posted June 20, 2023 Author Posted June 20, 2023 15 hours ago, Swiss Toni said: Bit of work to do there! Will it start? Will find out tomorrow when I have a day off, little jobs done in between night shifts is drain fluids strip brakes, check wiring, for obvious breaks, has dyna coils and ignition, pingle fuel tap nice high lift cams, turns over OK 8 hours ago, R1guy said: Big headlight and draw-thru system and be done with it … Do you have a spare draw-thru? Will see if it runs Plan is to use my universal number plate and road test if running Quote
gsxwill Posted June 20, 2023 Author Posted June 20, 2023 13 hours ago, Dezza said: Looks like an ace project bike. If you change your mind on it can I have 1st dibs? Will keep you in mind 1 Quote
gsxwill Posted June 25, 2023 Author Posted June 25, 2023 So stripped the clutch apart, plates stuck together Clutch basket is like new, cleaned and tightened back up, for some reason clutch is so much lighter than my other ef 1 Quote
gsxwill Posted June 25, 2023 Author Posted June 25, 2023 Started up nice and smooth Though chain rubbing on back of foot pegs and pingle tap needs mods to stop it being permanently on, just checking every bolt be for a road test on a quiet Sunday night 1 Quote
Dezza Posted June 25, 2023 Posted June 25, 2023 Maybe the 'new' efe has OEM clutch springs and your other bike has heavy duty springs. This would explain why the clutch on the newer bike has a lighter clutch. Quote
gsxwill Posted June 25, 2023 Author Posted June 25, 2023 1 hour ago, Dezza said: Maybe the 'new' efe has OEM clutch springs and your other bike has heavy duty springs. This would explain why the clutch on the newer bike has a lighter clutch. You could be right, Quote
Duckndive Posted June 25, 2023 Posted June 25, 2023 4 hours ago, gsxwill said: Clutch basket is like new, cleaned and tightened back up, for some reason clutch is so much lighter than my other ef most likely its stock and unadulterated Quote
gsxwill Posted July 11, 2023 Author Posted July 11, 2023 So first test ride completed and engine sounds sweet and the exhaust might look scrappy but it let's the motor breathe certainly over my bulk standard ef Quote
gsxwill Posted July 11, 2023 Author Posted July 11, 2023 Plans going forward change clocks, Got WN usd front end to go in and try and source a original top half fairing when funds allow But that might be a while from now because the nice man who sold me this ef also sold me this 5 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.