CalFab swingarm

[White79bu]

I recently bought a CalFab swingarm for my GS1000E. I'm slowly collecting parts for it. Do I need anything special to do the swingarm swap? 

I've never worked on a bike so this is going to be a learning experience. 

Edited December 3, 2022 by White79bu

[johnr]

we need pictures.
not sure we will be able to help, but ive never heard of a calfab swingarm so i want to know what it looks like! if it was made for the bike, chances are itll use stock bearings.

[wraith]

Welcome to OSS

Plus one with johnr

But someone on here may know just what you need, a lot of clever people on here 

[White79bu]

[johnr]

not the most handsome swingarm ive ever seen, the wheel mounts make my eyes bleed, but i bet it wont flex too much judging by the size of it.

[rodneya]

Best bet would be to contact Chris at Motogp Werks in California. He made the arm. If it was made for the 1000 it should be a straight fit as long as you have the adjuster blocks.

Pic of the new ones he makes.

[White79bu]

I contacted Chris he was able to confirm it was a CalFab swingarm. But I don't have the adjuster blocks. I bought it instead of an 1100e swingarm because it was the same price. 

[Highwaystar]

Got one on mine, polish up real nice

[tobar]

the end of that swingarm looks like the original oss sticker x2 so possibly the most apt swingarm to put on an old skool suzuki

[Dezza]

I like the swingarm that looks like it has the head of a T. rex on each end. Dinosaurs are cool

[TonyGee]

59 minutes ago, Dezza said:

I like the swingarm that looks like it has the head of a T. rex on each end. Dinosaurs are cool

have you been smoking wacky backy  ?