Dezza Posted May 26, 2020 Posted May 26, 2020 (edited) I want a slabby rear light on my current project bike as they are so instantly recognisable. Has anyone here used one in conjunction with an aftermarket fibre-glass seat unit? How was it fitted? To the seat unit itself by glassing-in some re-inforcement and captive nuts or by mounting it on some subframe brackets so the light remains on the bike when the seat is removed? Suggestions and especially pics appreciated Edited May 26, 2020 by Dezza Quote
carlinmidarlin Posted May 26, 2020 Posted May 26, 2020 (edited) Edited May 26, 2020 by carlinmidarlin Posted twice 2 Quote
carlinmidarlin Posted May 26, 2020 Posted May 26, 2020 Just now, carlinmidarlin said: This is mine in a fibre man seat unit, the light is sika flexed is so it come out with the seat unit as 1 Quote
Dezza Posted May 26, 2020 Author Posted May 26, 2020 21 minutes ago, carlinmidarlin said: This is mine in a fibre man seat unit, the light is sika flexed is so it come out with the seat unit as 1 Any pics showing how the light is fixed to the seat unit? I know this can only really be done with the seat off of the bike so no probs if you can't do this Quote
bluedog59 Posted May 27, 2020 Posted May 27, 2020 (edited) I would suggest that mounting the light directly to the seat unit is the way to go. Fibreglass seats tend have a degree of flex and movement in use so any aperture for a frame mounted light would need to allow for this and probably end up looking overlarge and shite. What did Mr Burns use ? I seem to remember it was off a YZF750. Edited May 27, 2020 by bluedog59 Added the bit about Mr Burns. Quote
Dezza Posted May 27, 2020 Author Posted May 27, 2020 3 hours ago, bluedog59 said: I would suggest that mounting the light directly to the seat unit is the way to go. Fibreglass seats tend have a degree of flex and movement in use so any aperture for a frame mounted light would need to allow for this and probably end up looking overlarge and shite. What did Mr Burns use ? I seem to remember it was off a YZF750. Yep, I think this is the way to go too. The slabby light is also really lightweight, which makes things easier. Dunno about the light Burns used. He built his in 1988 so it couldn't have been from a YZF 750. The one in the pic isn't a slabby light though. I want a slabby light as the shape is perfect for an F1-type seat unit and the frame was built for when the only GSXR or oilcooled Suzuki even was a slabby - I want some sort of external emblem that shouts 'slabby' and the rear light is perfect for this because as far as I know only 750/1100 slabbies had these lights 1 Quote
Sam-Jaffa Posted May 28, 2020 Posted May 28, 2020 I've got one in mine, it is attached to the seat unit not the frame though, I can try and get pics if you like? 1 Quote
Dezza Posted May 28, 2020 Author Posted May 28, 2020 3 hours ago, Sam-Jaffa said: I've got one in mine, it is attached to the seat unit not the frame though, I can try and get pics if you like? Thanks Sam: more pics is always good Quote
carlinmidarlin Posted May 30, 2020 Posted May 30, 2020 Heres my rear light sika flexed in and I had to grind away this little bit to get the bulb holder in as the holes for the seat unit are out we’re the battery is 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.