Jump to content

Bandit loom current draw


ElBlandito

Recommended Posts

Posted

Anybody have any issues running dual headlights of a slabby/slingy on a B12 loom? Both low and high beam wires are small gauge in the harness and a quick test run against the battery with the same gauge wire on 92N headlights got the wires hot in a hurry. Debating on pulling new wire into the loom to feed the headlights.

Posted (edited)

Dunno about a slingshot but that's not a slabby diagram as a slabby (and other old Suzukis I know of) have 4 wire ignition switches, not 6 wire switches. The fuse box is different too.

 

It's the twin light bikes that have relays, not the Bandit so look at the slabby/slingshot loom diagram.

Edited by Dezza
Posted

Why not just wire a pair of relays in? Use the Y/W to switch the relays and take a 12v fused feed direct off either the spare +ve on the fusebox (If theres one) or direct off the battery to power the lights? You're only running a single cable then

Posted

Cheers guys. The wiring diagram I have been using on the 92 GSX-R750N is for some version of an 1100M and shows no relays, but it may not be correct. Will probably go with @davecara's suggestion and use the switch wires to trigger two separate relays. Thanks!

image.thumb.png.a3b4f68d1080e71bac9b0c03b64b1a41.png

Posted
25 minutes ago, Gixer1460 said:

Ah Ha - that's why I posted a diagram with them - i'm smart like that LOL!

yeah the 1100L is one year behind on the 750L so it still has the "old" electrics. The 1100M/N don't have relays.

You're so smart

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...